Pembrokeshire · Wales

Bath Repair in Amroth

Local bath repair for Amroth: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Snagging damage from a refit
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Amroth

Bath repair in Amroth without replacing anything

A damaged bath doesn’t have to mean a new bathroom. Our technicians fill, shape and refinish the damage, with the colour mixed on site. Whether it’s scuffs and scratches in the surface and damage beneath the taps, we can help.

We stand behind the work with a one-year guarantee.

Location
Amroth (SA67)
County
Pembrokeshire
Guarantee
One year on every repair
Price
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Pembrokeshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

When a repair is not the answer

Some jobs aren’t right for a repair, including:

  • Wear across the entire surface, which needs re-enamelling
  • Cracks in parts of an acrylic bath we cannot get to from below
  • A steel bath rusted through

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • Whirlpool & spa baths
  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding

What bath repair costs

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • The colour and finish to match
  • Any earlier repairs that need removing first
  • The material
  • How many items we do on one visit

Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.

How to get a fixed quote

You can usually get a fixed price without us visiting. To make it quick:

  • A coin or ruler next to the damage for scale
  • Whether it’s been repaired or coated before
  • One sharp close-up of the damage
  • Your postcode, so we can check dates

For a price in Amroth, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Where we work around Amroth

Amroth is about 15 miles east of Haverfordwest, in Pembrokeshire. We travel to homes and businesses in Amroth and the surrounding area, so nothing has to leave your home. Amroth is one of 223 places in Pembrokeshire we cover.

Every address in SA67 is within our area, from the main roads to the quietest streets. Jobs here include addresses on The Water's Edge and Cliff Road and the roads around them. Nearby, we also work in Summerhill (1 mile west), Llanteg (2 miles north), Crunwere (2 miles north), Stepaside (2 miles west) and Ludchurch (3 miles north-west). Larger places within reach include Haverfordwest (15 miles west), Pembroke (12 miles west), Pembroke Dock (13 miles west), The Marsh (14 miles west), Dinbych-y-Pysgod (5 miles south-west) and The Green (5 miles south-west).

What’s near Amroth

Our customers here include homes close to St Elidyr's Church and New Inn, among other places. For rail, the closest station is Kilgetty station, about 2.9 miles west of the centre. A little further out are Tenby Cottage Hospital (4.6 miles south-west) and Amroth Castle (within half a mile west). The countryside around Amroth includes Craig-y-borion.

Map of Amroth © OpenStreetMap contributors

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.

Should you replace it?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why book with us

  • Colour mixed on the day to match
  • Everything repaired in place
  • Work done at your home or business
  • Same prices wherever you are

Take a look at our prices page and guide to resurfacing and replacement costs.

What we’re called out for in Amroth

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.

Get in touch if you’ve noticed any of these:

  • A chipped rim or side
  • A failed DIY repair that’s discoloured or lifting
  • Damage done while the bathroom was being fitted
  • Impact holes in acrylic

Comparing quotes

  • Whether the price covers travel
  • How the colour is matched
  • What prep work is covered
  • What the guarantee covers, and for how long

Choosing a repair company

What we do, step by step

Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and the room is left clean and tidy.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. We leave it to cure; you can typically use the bath the following day.

Getting ready for the visit

  • Let the surface dry out before the visit
  • Plan for the room to be out of bounds to pets and children
  • Tell us if there are stairs or a lift

Getting a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a fixed price

Related advice

FAQs for Amroth

Can you repair a hole in a bath?

Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.

How invisible is a bath repair?

The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.

Can you quote from photos?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

What about rust by the waste?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Is there a call-out fee?

There’s no separate call-out charge. Your fixed quote includes everything.

Can you repair a crack in an acrylic bath?

Usually, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.

Is a bath repair permanent?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.