Leicestershire · England
Bath chip & crack repair in Stoke Golding, Leicestershire
We travel to Stoke Golding for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- A kit repair that didn’t last
About our bath repair in Stoke Golding
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We’re frequently asked to fix cracks in an acrylic bath and a failed DIY repair that’s discoloured or lifting, in whirlpool & spa baths, pressed steel enamel and cast iron enamel.
All of our repairs are guaranteed for twelve months in Stoke Golding and everywhere else. We return to put right any problem with the work.
- Area
- Stoke Golding (CV13)
- County
- Leicestershire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Stoke Golding
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
The most common problems we’re called about are:
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
- Damage beneath the taps
Before booking anyone
- How changes to the job are handled
- What prep work is covered
- If travel is included in the price
- How your room will be protected
The process
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. It normally takes a few hours, depending on the damage, and we will tell you if anything changes.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the following day.
Getting ready for the visit
- Open a window if you can
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
Get a quote
If you are in Stoke Golding and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Our work in Stoke Golding
Stoke Golding is about 3 miles north-west of Hinckley, in Leicestershire. Customers in Stoke Golding get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We work in 287 places across Leicestershire, from the larger towns to small villages. Our jobs stretch from Stoke Golding to Birmingham (about 21 miles away).
Jobs in CV13 work the same way as everywhere else we cover. Local streets include Main Street, High Street and Station Road, all of which we cover. Nearby, we also work in Dadlington (1 mile north), Higham on the Hill (2 miles south-west), Shenton (2 miles north-west), Lindley (2 miles west) and Upton (3 miles north-west). Within a short drive, we also cover Hinckley (3 miles south-east), Wigston (13 miles east), Coalville (11 miles north), Ashby-de-la-Zouch (13 miles north), Shepshed (15 miles north) and Lutterworth (12 miles south-east).
Near you in Stoke Golding
Locally, our jobs take us to homes close to The Dog and Hedgehog pub, Church of St Margaret and Saint Martin's Catholic Voluntary Academy. The nearest railway station is Hinckley station, roughly 3 miles south-east of the centre. Well-known places in the area include Ratcliffe Culey (4.8 miles west) and George Eliot Hospital (5 miles south-west). The countryside around Stoke Golding includes Ambion Hill.
Honest limits
A few problems are outside what a surface repair can do:
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
- Cracks in acrylic we can’t reach from underneath
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Stoke Golding
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Towns and villages near Stoke Golding
More services for Stoke Golding
Common questions in Stoke Golding
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can rust on a bath be repaired?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
What does bath repair cost?
Repairs from £95. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can you repair something that’s been repaired before?
Generally, yes. Tell us what was done before and we’ll plan for it.
What areas do you cover?
We cover the whole UK, including Stoke Golding and the rest of Leicestershire. Send your postcode with your photos and we’ll offer you dates.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
Repair or replace: which is better?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why Stoke Golding clients choose us
- One price list for the entire UK
- Generally one visit, start to finish
- Dust sheets down, tidy finish
- Fixed prices from your pictures
Read our pricing and resurfacing vs replacement cost guide.
Prices and what affects them
Prices start from £95. There is no charge for travel to Stoke Golding. The price comes down to:
- What kind of damage it is
- The size and number of damaged areas
- Doing more than one item at once
- The material
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
How to get a fixed price
Phone photos are fine. Make sure they show:
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- What it’s made of, if you know
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
