East Riding of Yorkshire · England
Bath Repair for Swine homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Swine. Send photos for a free, fixed quote.
- Repairs from £95
- Cracks in an acrylic bath
- A chip where the taps sit
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Bath repair in Swine without replacing anything
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. We are often asked to fix scuffs and scratches in the surface and holes from dropped items, across cast iron enamel, whirlpool & spa baths and pressed steel enamel.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Swine (HU11)
- Area hub
- East Riding of Yorkshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
FAQs for Swine
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Are there extra charges for Swine?
Travel is included in the price, and we charge the same wherever you are.
Is a holed acrylic bath repairable?
Typically. Photos of the hole and the underside help us check.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a bath repair durable?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Nearby places to Swine
More services for Swine
Repair or replace in Swine?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
- One-year guarantee on every repair
- Colour-matched on site
Read our pricing or resurfacing vs replacement cost guide.
Swine and nearby
Swine is about 4 miles north-east of Kingston upon Hull, in East Riding of Yorkshire. Book a date that suits you, and we will give you an arrival time in advance, so there is no waiting around. Swine is one of 299 places in East Riding of Yorkshire where we work. Our nearest city page is Leeds, about 52 miles away.
Every address in HU11 is within our area. We regularly work on streets such as Main Street, Dancing Lane and Coniston Lane. If you are just outside Swine, we cover Coniston (1 mile east), Skirlaugh (2 miles north), Old Ellerby (2 miles north-east), New Ellerby (3 miles north-east) and Arnold (4 miles north). We also work in nearby towns such as Beverley (7 miles west), Driffield (15 miles north-west), Hessle (9 miles south-west), Cottingham (6 miles west), Hornsea (8 miles north-east) and Brough (13 miles south-west).
Landmarks near Swine
In Swine, that means homes near Kingswood Academy and Church of St Mary and the streets around them. A little further out are Princess Royal Hospital (2.1 miles south).
What we can’t put right
We won’t take on work that won’t last, so these are the limits:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
Send us photos and we will tell you honestly.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Avoid scourers, wire wool and gritty cream cleaners
- Ensure an acrylic bath is firm underfoot
- Do not leave razors or cans standing in the bath
- Fix dripping taps early to stop staining and limescale
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
What we’re called out for in Swine
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Signs it’s time to call us include:
- An old repair that has yellowed or come loose
- Snagging damage from a refit
- Hairline or through cracks in acrylic
- Damage beneath the taps
What your quote should include
- How to care for the finish
- The length of the guarantee and what it covers
- Who turns up on the day
- If travel is included in the price
What we do, step by step
The work is clean and fairly quiet. We protect the area first, then the work takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to care for it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Have a window or extractor fan available
- Let the surface dry out before the visit
- Clear the area around the damage
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
