East Riding of Yorkshire · England
Bath Repair in Thorngumbald
Chip and crack repairs to enamel, acrylic and cast iron baths in Thorngumbald, carried out at your home and guaranteed for a year.
- Repairs from £95
- Deep scratches in acrylic
- A chip where the taps sit

Our work in Thorngumbald
Thorngumbald is about 7 miles east of Kingston upon Hull, in East Riding of Yorkshire. Anywhere in HU12, a technician comes to you. Our repair technicians cover 299 places in East Riding of Yorkshire, from the larger towns to small villages. We work right across the region, from Thorngumbald to Leeds (about 57 miles away).
Every address in HU12 is covered. Streets in the area include St Mary's Drive, Elm Tree Close and Elm Tree Avenue, all of which we cover. Thorngumbald sits on or near the A1033, which makes travel easy. We also cover the places around Thorngumbald: Camerton (1 mile east), Ryehill (1 mile east), Hedon (2 miles north-west), Burstwick (2 miles north-east) and Keyingham (3 miles east). We also work in nearby towns such as Beverley (13 miles north-west), Hessle (11 miles west), Cottingham (11 miles west), Hornsea (13 miles north), Anlaby (11 miles west) and Willerby (11 miles west).
Local landmarks in Thorngumbald
Around Thorngumbald, we work in homes near Thorngumbald Primary School, New Royal Mail pub and Church of St Mary and the streets around them. Further afield, we also cover the area around Hedon Museum (1.7 miles north-west) and Burstwick Castle (1.9 miles north-east).
Bath repair in Thorngumbald without replacing anything
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Common call-outs are for scuffs and scratches in the surface and a kit repair that didn’t last, across cast iron enamel, pressed steel enamel and acrylic.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.

- Where
- Thorngumbald (HU12)
- Area hub
- East Riding of Yorkshire
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Let us know if it has been repaired before
- Let us know about parking or access
- Keep a parking space free if you can
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
Signs you need bath repair in Thorngumbald
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.
People generally call us after spotting something like this:
- Rust spots around the plughole
- Deep scratches in acrylic
- Chips on the rim or sides
- Cracks in an acrylic bath
What to look for in a quote
- Whether the price covers travel
- Whether cleaning and preparation are in the price
- How the colour is matched
- The length of the guarantee and what it covers
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Repair or replace: which is better?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Why Thorngumbald customers choose us
- Same prices wherever you are
- We will tell you if it’s not worth repairing
- Every repair guaranteed for a year
- Free fixed quotes from pictures
Read our full price list or resurfacing vs replacement cost guide.
Landlord and trade work in Thorngumbald
Landlords, letting agents and housing providers in Thorngumbald use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Do not scrub with anything abrasive
- Stick to mild cleaners and a soft cloth
- Fix dripping taps early to stop staining and limescale
- Check that an acrylic bath does not move when you stand in it
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Common questions in Thorngumbald
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
How long before I can use the bath?
Normally the following day. We confirm the time before we leave.
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
What happens once I’ve sent photos?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
What do you need from me?
Just photos, your postcode and a contact number. On the day, access to the room.
What bath repair costs
Repairs from £95. Every quote is fixed and free. What we look at:
- The material and finish
- Unusual colours or finishes
- Whether we combine several jobs
- Access to the area
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed quote
Before you send pictures, a few simple things make all the difference:
- One sharp close-up of the damage
- What it’s made of, if you know
- Where you are, by postcode
- Details of any past repairs
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
When we would advise against a repair
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Water coming from the waste or taps rather than the bath
- A steel bath rusted through
- Wear across the whole surface, which needs re-enamelling
If in doubt, send photos and we will say what we think.
Materials we work on in Thorngumbald
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
More services for Thorngumbald
About our accreditations · Every repair comes with a one-year guarantee.

