Wiltshire · England
Bath Repair in Tilshead
Bath repair in Tilshead without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips on the rim or sides
How we handle bath repair in Tilshead
A typical bath repair is a few hours’ work, and the bath is back in use the following day. You won’t need a plumber or tiler, because the bath does not move. Common call-outs are for impact holes in acrylic and scratches you can feel with a fingernail, in cast iron enamel, acrylic and roll-top & freestanding.
All of our repairs are guaranteed for twelve months in Tilshead and everywhere else. We return to put right any problem with the work.
- Where
- Tilshead (SP3)
- Region
- Wiltshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices start from £95. There’s no area surcharge for Tilshead. The price reflects:
- The colour and finish to match
- The material and finish
- Access to the area
- How much damage there is
A repair is priced on what needs doing, not your postcode. You will see the full price before you book.
Quotes from your photos
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A photo taken from further back
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Tilshead and the surrounding area
Tilshead is about 8 miles south of Devizes, in Wiltshire. Across the SP3 area, we come to you. We cover all 425 towns and villages across Wiltshire, from the larger towns to small villages.
Jobs in SP3 are booked in the same way as anywhere else. Streets in the area include High Street, Back Lane and Candown Road, all of which we cover. Neighbouring places we cover include Elston (3 miles south-east), West Lavington (3 miles north-west), Littleton Panell (4 miles north-west), Market Lavington (4 miles north) and Fiddington Sands (4 miles north). We also work in nearby towns such as Salisbury (13 miles south-east), Trowbridge (13 miles north-west), Calne (15 miles north), Devizes (8 miles north), Westbury (10 miles west) and Melksham (12 miles north-west).
Near you in Tilshead
We visit homes around St Thomas à Becket Church of England Aided Primary School and Church of St Thomas A Becket and the streets around them. Further afield, we also cover the area around Market Lavington Museum (4 miles north). For a walk, there is Lavington Down.
Landlord and trade work in Tilshead
For anyone letting property in or around Tilshead, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Common questions in Tilshead
Can you repair a hole in a bath?
Usually. Photos of the hole and the underside help us check.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Tilshead.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we’ll ask for another angle.
How to care for the repair
After the repair has cured, a few habits help it last:
- Stick to mild cleaners and a soft cloth
- Rinse the bath after use, especially in hard water areas
- Keep abrasive pads and gritty cleaners away from the bath
- Put a towel in the bath if you’re working above it
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
The process
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a morning or an afternoon from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
Ask for a price
Send us a photo of the damage and one of the entire item, and tell us you are in Tilshead, and we’ll come back with a fixed quote.
Read more
When to call us in Tilshead
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Get in touch if you’ve noticed any of these:
- Chips caused by builders
- A chipped rim or side
- Impact holes in acrylic
- Rust spots around the plughole
Comparing quotes
- When it can be used again
- What happens if the damage is worse than the pictures show
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
Repair or replace in Tilshead?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Most jobs done in one visit
- No need to remove anything
- Colour mixed on the day to match
- A year’s guarantee on all work
Read our pricing or bath cost comparison.
Nearby places to Tilshead
What else we do in Tilshead
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
- Leaking fittings, which need a plumber
If in doubt, send pictures and we’ll say what we think.
What we work on
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
