Cornwall · England
Bath Repair in Tremar
Local bath repair for Tremar: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rusty patches near the plughole
- Damage beneath the taps

Bath repair in Tremar, done in place
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. You can normally use the bath the next day. Whether it’s chips caused by builders and rusty patches near the plughole, we can help, whatever the material.
Big or small, it’s backed by a one-year guarantee in Tremar and across Cornwall.

- Location
- Tremar (PL14)
- County
- Cornwall
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Nearby places to Tremar
More services for Tremar
How it works
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a few hours.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the following day.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Open a window if you can
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Avoid scourers, wire wool and gritty cream cleaners
- Don’t leave a fresh chip for long
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Prices and what affects them
Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:
- How hard the colour is to match
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- Access to the area
Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your photos
Two or three clear pictures are normally enough. Try to include:
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- Natural light rather than flash
- Any details about the material
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Where we work around Tremar
Tremar is about 2 miles north of Liskeard, in Cornwall. Jobs in Tremar are booked in like any other job: a fixed price from your photos, then a visit to do the work. We cover 644 places in Cornwall.
Our repair technicians cover all of the PL14 postcode area and the streets around it. From Tremar Lane, Venland Close and Rosecraddoc View or anywhere nearby, we can come to you. Other places close to Tremar include Tremar Coombe (1 mile north), St Cleer (1 mile west), Darite (1 mile north), Common Moor (1 mile north-west) and Trembraze (2 miles south). Larger places within reach include Stonehouse (15 miles south-east), Bodmin (11 miles west), Saltash (12 miles south-east), Launceston (11 miles north), Looe (9 miles south) and Torpoint (14 miles south-east).
Local landmarks in Tremar
Around Tremar, we work in homes near Liskeard School and Community College, Church of St Clarus and St Cleer Primary Academy, among other places. Tremar’s nearest station is Liskeard station, roughly 2.7 miles south. A little further out are Liskeard and District Museum (2.2 miles south) and Caradon (2.3 miles south). Green spaces nearby include Caradon Hill.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Common questions in Tremar
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and we’ll quote them together.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
What a repair can’t fix
A repair is not right for every job, including:
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
If in doubt, send photos and we will say what we think.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Repair or replace: which is better?
Replacing a fitted bath generally means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in a single visit. Our bath repair starts from £95. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why book with us
- Most jobs done in one visit
- CHAS and Constructionline accredited
- Same prices wherever you are
- Colours mixed by hand to suit your surface
See our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.

