Cornwall · England

Bath Resealing for Trevanson homes

We travel to Trevanson for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.

  • Gaps in the seal
  • Black mould in the sealant
  • Damp near the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Trevanson homes

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Shower trays

Trays are sealed with weight on them, for the same reason.

About our bath resealing in Trevanson

We cut out all of the old sealant, deal with any mould, and reseal with new mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. Whether it’s old sealant that looks dirty and water getting behind the bath or tray, we can help.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Roll-top bath being refinished by a Surface Doctor technician
Location
Trevanson (PL27)
County
Cornwall
Cover
A year, on every repair
Price
Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026

Landlord and trade work in Trevanson

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

How to care for the repair

A little care keeps the finish looking good. We recommend:

  • Clean the joints with a mild cleaner
  • Do not stand toiletries on the seal
  • Wipe the joints dry after use
  • Reseal at the first sign of lifting

Don’t scrape the sealant with anything sharp, and do not stand bottles on the seal.

Damp below or loose tiles need checking quickly. There may be more going on, so we will tell you if it needs a builder or plumber.

Trevanson and the surrounding area

Trevanson is about 7 miles north-west of Bodmin, in Cornwall. Customers in Trevanson get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Trevanson is one of 644 towns and villages in Cornwall we cover.

All of PL27 is covered, from the main roads to the quietest streets. Local streets include Rowan Road, Trevanson Road and Talmena Avenue, all of which we cover. Being close to the A39, Trevanson is easy for our technicians to reach. Neighbouring places we cover include Dunveth (1 mile south-east), Burniere (1 mile north-east), Wadebridge (1 mile east), Bodieve (1 mile north-east) and Egloshayle (1 mile east). Within a short drive, we also cover Newquay (12 miles south-west), St Austell (13 miles south), Bodmin (7 miles south-east), Sandy Bottom (13 miles south), Bethel (13 miles south) and Nansledan (11 miles south-west).

Around Trevanson

We visit homes around Wadebridge School, Church of St Breock and St Breock Primary School and the streets around them. Nearby you will also find Shipwreck Museum (3.9 miles west) and Doyden Castle (4.9 miles north). Green spaces nearby include St Breock Downs.

  • Local facilities include North Cornwall (0.8 miles east)
Map of Trevanson © OpenStreetMap contributors

FAQs for Trevanson

Do I need to be at home?

Yes. We need access to the room while we work, at a time we agree with you.

How long does resealing take?

Around two hours for a bath, plus curing time.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

Why does my sealant keep splitting?

Normally because the bath or tray moves, or it was sealed with the bath empty. We fill the bath before sealing it.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Resealing in Trevanson: why it matters

Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Why book with us

  • Same prices wherever you are
  • Free fixed quotes from pictures
  • CHAS and Constructionline accredited
  • Normally one visit, start to finish

See our pricing.

The process

The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a couple of hours. At the end we talk you through how soon it can be used and how to care for it.

  1. The surrounding area is protected and the joints masked.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. We run a continuous bead of new silicone.
  5. The bead is smoothed, the tape removed and the seal left to cure.

How to prepare

  • Make sure the area is dry
  • Point us to the nearest place to park
  • Plan for the room to be out of bounds to pets and children

Ask for a price

Email us a picture of the damage and one of the whole item, and tell us you’re in Trevanson, and we’ll reply with a fixed price.

Get a free quote

Advice

What we’re called out for in Trevanson

Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.

Signs it’s time to call us include:

  • Black spots in the silicone
  • Water getting behind the bath or tray
  • Stained silicone
  • Silicone coming away from the tiles

What your quote should include

  • What prep work is covered
  • A fixed price, and whether VAT is included
  • When it can be used again
  • How your room will be protected

Our hiring checklist

What a repair cannot fix

In fairness, there are a few things a repair will not fix:

  • Very wide gaps that need a trim
  • Loose tiles, which need refixing first
  • A bath or tray that moves, until its support is fixed

Send us photos and we’ll tell you honestly before booking.

What we work on

  • Shower trays & enclosures
  • Basins & vanity units
  • Baths
  • Kitchen worktops & sinks
  • Wet rooms
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.