Perth and Kinross · Scotland
Bath Repair for St David's homes
Bath repair in and around St David's: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
Bath repair in St David's, done in place
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, generally in a single visit. Whether it’s hairline or through cracks in acrylic and holes from dropped items, we can typically put it right, whatever the material.
Every job is backed for twelve months in St David's and everywhere else. If something goes wrong with the work, we come back.
- Where
- St David's (PH7)
- County
- Perth and Kinross
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for St David's
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Do you cover the entire of Perth and Kinross?
We cover the entire UK, including St David's and the rest of Perth and Kinross. Just include your postcode and we will confirm dates.
When can I have a bath again?
Most baths can be used the day after. We will tell you the exact curing time when we finish.
Do you come to St David's?
Yes. We cover the whole UK and come to St David's and the rest of Perth and Kinross. Send us photos for a fixed quote, or call 0345 017 0787.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Perth and Kinross.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
What we’re called out for in St David's
Glass and heavy bottles cause more chips than anything else. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Customers usually contact us about:
- Impact holes in acrylic
- A cracked acrylic bath
- Scuffs and scratches in the surface
- Damage beneath the taps
Before you book anyone
- What happens if they find more damage
- Whether a trained technician does the job
- How long the guarantee is and what it covers
- What prep work is covered
How we price bath repair
Prices start from £95. We price every job individually. The main factors are:
- Whether we combine several jobs
- Where the damage is and how we get to it
- Unusual colours or finishes
- Any earlier repairs that need removing first
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Send photos for a quote
Phone pictures are fine, there’s no need for anything special. Ensure they show:
- The material, if you know it
- One picture of the entire bath
- One sharp close-up of the damage
- Any earlier repairs or coatings
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you’re under no obligation.
How to look after the repair
Simple care helps the repair last. Our advice:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Fix dripping taps early to stop staining and limescale
- Don’t scrub with anything abrasive
- Protect the bath with a towel when doing jobs nearby
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
St David's and nearby
St David's is about 10 miles west of Perth, in Perth and Kinross. Customers in St David's get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We work in 107 places in Perth and Kinross, from the larger towns to small villages. You can also see our page for Edinburgh, about 35 miles away.
All of PH7 is covered. Other places close to St David's include Madderty (1 mile north-east), Balgowan (3 miles north-east), Aberuthven (4 miles south-east), Gilmerton (4 miles north-west) and Tullibardine (4 miles south). Within a short drive, we also cover Perth (10 miles east), Crieff (5 miles west), Kinross (15 miles south-east), Letham (9 miles east), Scone (12 miles east) and Tulloch (10 miles east).
What’s near St David's
Typical jobs here are in homes near East Craigmuir and the streets around them. A little further out are Strathallan Castle (3.5 miles south-west) and St Margaret's Hospital (4.9 miles south).
Towns and villages near St David's
What else we do in St David's
What we cannot put right
Not everything can be repaired, and we will tell you before we start. We can’t fix:
- Cracks in acrylic we cannot reach from underneath
- Water coming from the waste or taps rather than the bath
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
The process
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and start once you are happy with the plan. It typically takes a few hours, depending on the damage, and you are welcome to carry on with your day while we work.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the next day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Tell us about parking, stairs or access
- Let us know which floor the room is on
How to get a price
To get a price, send two or three photos using our quote form or call us. We will tell you honestly whether it can be repaired.
Related advice
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
What you get with us
- Colours mixed by hand to suit your surface
- Nothing taken out or refitted
- Every repair guaranteed for a year
- Work done at your home or business
Take a look at our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
