Hertfordshire · England
Bath chip & crack repair in Tyttenhanger, Hertfordshire
We travel to Tyttenhanger for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A hole punched through by something heavy
- Chips caused by builders
Bath repair at your home in Tyttenhanger
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, typically in a single visit. If you are dealing with deep scratches in acrylic and rust spots around the plughole, we can help, whatever the material.
You get a one-year guarantee, the same in Tyttenhanger as everywhere else we work.
- Area
- Tyttenhanger (AL4)
- County
- Hertfordshire
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Tyttenhanger
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
The process
Arrival times are agreed in advance. Once we’re there, the work takes a few hours, depending on the damage for most jobs. We leave the room clean and you will know when it can be used.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Make sure the room can be ventilated
- Let us know about parking or access
- Tell us if there are stairs or a lift
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
What a repair can’t fix
A repair is not right for every job, for example:
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
- Cracks in parts of an acrylic bath we can’t get to from below
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Looking after it afterwards
So the finish stays in good condition:
- Get a dripping tap fixed promptly
- Give the bath a quick rinse after use
- Avoid scourers, wire wool and gritty cream cleaners
- Cover the bath during DIY or decorating
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Nearby places to Tyttenhanger
More services for Tyttenhanger
Repair or replace in Tyttenhanger?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book.
Why choose Surface Doctor in Tyttenhanger
- Colours mixed by hand to suit your surface
- Same prices wherever you are
- Usually one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page or guide to resurfacing and replacement costs.
Tyttenhanger and the surrounding area
Tyttenhanger is about 2 miles south-east of St Albans, in Hertfordshire. We travel to clients in Tyttenhanger, so there is no workshop to go to. Our technicians cover all 381 towns and villages in Hertfordshire. Our jobs stretch from Tyttenhanger to London (about 19 miles away).
We work across AL4 and the streets around it. From Highfield Lane and Tyttenhanger Green or anywhere nearby, we can come to you. Close by, we cover London Colney (1 mile south), Sleapshyde (1 mile north-east), Smallford (2 miles north-east), Broad Colney (2 miles south) and Colney Heath (2 miles east). Within a short drive, we also cover Watford (7 miles south-west), Hemel Hempstead (7 miles west), Stevenage (13 miles north), Welwyn Garden City (6 miles north-east), Harpenden (6 miles north-west) and Hitchin (15 miles north).
Local landmarks in Tyttenhanger
In Tyttenhanger, that means homes near Nicholas Breakspear School, Church of St Mark and Windermere Primary School, among other places. Other local landmarks include The Plough pub (within half a mile north-east) and Highfield Park (0.5 miles north-west). For rail, the closest station is St Albans station, roughly 1.7 miles north-west. Well-known places in the area include Hill End Hospital (0.9 miles north-west) and St Albans Musical Museum (1.9 miles north-west). Not far away are Colney Heath Local Nature Reserve and Verulamium Lake.
FAQs for Tyttenhanger
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Can you quote from photos?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
When can I have a bath again?
Normally by the following day, depending on the repair.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Is there a guarantee?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Do you work in Tyttenhanger?
Yes. We cover the entire UK and come to Tyttenhanger. Send pictures and we’ll quote, or call 0345 017 0787.
Signs you need bath repair in Tyttenhanger
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
These are the problems we are asked about most:
- A chipped rim or side
- Chips under the taps
- Scratches you can feel with a fingernail
- An old repair that has yellowed or come loose
Questions to ask before you book
- What prep work is covered
- What the guarantee covers, and for how long
- A fixed quote, and whether VAT is included
- Whether they match the colour on site
What affects the price in Tyttenhanger
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- How many areas need work
- Doing more than one item at once
- Where the damage is and how we get to it
- What the surface is made of
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send pictures for a quote
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Any details about the material
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
If you are in Tyttenhanger and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
About our accreditations · Every repair comes with a one-year guarantee.
