Pembrokeshire · Wales

Bath Repair in Uzmaston

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Uzmaston, with a one-year guarantee on every repair.

  • Repairs from £95
  • Impact holes in acrylic
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Uzmaston

Honest limits

Some jobs are not right for a repair, for example:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Acrylic cracks with no access behind them
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

If in doubt, send photos and we will say what we think.

Materials we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths

Bath repair in Uzmaston without replacing anything

Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We work on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths, and the jobs we see most are damage beneath the taps and rust spots around the plughole.

The work is covered for a year after we finish. If anything is not right, ring us and we will come back.

Where
Uzmaston (SA62)
Region
Pembrokeshire
Cover
12 months on all our work
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Rinse it down after each bath
  • Clean with warm water and a mild detergent
  • Get any new chip repaired before it rusts
  • Cover the bath during DIY or decorating

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.

Common questions in Uzmaston

I tried a repair kit. Can you fix it?

Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.

What areas do you cover?

The entire UK, including all of Pembrokeshire. Just include your postcode and we will confirm dates.

What about rust by the waste?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

Will the repair last?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

Can landlords book you?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

How much does bath repair cost in Uzmaston?

Prices start from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.

Can you repair several things at once?

Of course, and it generally saves money. Just add the extra items to your photos and we will quote them together.

Can you repair a crack in an acrylic bath?

Normally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

For anyone letting property in or around Uzmaston, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.

What we’re called out for in Uzmaston

A cracked acrylic bath typically wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the bath move until it cracks.

People normally call us after spotting one of these:

  • A hole punched through by something heavy
  • A kit repair that didn’t last
  • Hairline or through cracks in acrylic
  • Chips on the rim or sides

What to look for in a quote

  • Whether they match the colour on site
  • What happens if the damage is worse than the pictures show
  • How your room will be protected
  • How long it needs to cure

Our hiring checklist

Why repair rather than replace?

If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with no extras added later.

Why us?

  • Honest advice, even when it means no job
  • Same prices wherever you are
  • Generally one visit, start to finish
  • Colour-matched on site

Take a look at our full price list or resurfacing vs replacement cost guide.

The process

Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, and we leave the room as we found it.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, typically the next day.

Preparing for the visit

  • Clear toiletries, mats and anything else from around the area
  • Let us know if it has been repaired before
  • Keep pets and children out of the room while we work

Getting a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

Send photos for a quote

Advice

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Uzmaston and the surrounding area

Uzmaston is about 1 mile south-east of Haverfordwest, in Pembrokeshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover 223 places in Pembrokeshire, from the larger towns to small villages.

Our repair technicians cover all of SA62 and the streets around it. That includes homes on Church Hill Lane and Riverside View and the roads around them. Close by, we cover Uzmaston and Boulston (1 mile east), Merlin's Bridge (1 mile west), Boulston (2 miles south), Albert Town (2 miles west) and Haroldston St. Issell's (2 miles west). Larger places within reach include Milford Haven (7 miles south-west), Pembroke (8 miles south), Pembroke Dock (7 miles south), Dinbych-y-Pysgod (13 miles south-east), The Green (13 miles south-east) and Fishguard (14 miles north).

Near you in Uzmaston

We visit homes around Sir Thomas Picton School, Haverfordwest Grammar School and St Marks V.A.P. School, among other places. The closest station to Uzmaston is Haverfordwest station, roughly 1 mile north-west. Nearby you’ll also find Haverfordwest Castle (1.4 miles north-west) and Withybush General Hospital (1.7 miles north-west). Open spaces near Uzmaston include Slebech Park Lake and Boulston Hill.

Map of Uzmaston © OpenStreetMap contributors

What bath repair costs

Prices start from £95. You will know the full cost before booking. We take into account:

  • The size and number of damaged areas
  • Where the damage is and how we get to it
  • Any earlier repairs that need removing first
  • What kind of damage it is

What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.

How to get a fixed price

Two or three clear photos are usually enough. It helps if you send:

  • Details of any past repairs
  • A clear, close picture of the problem area
  • Any details about the material
  • The postcode, so we can plan the visit

For a price in Uzmaston, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.