Cornwall · England
Bath chip & crack repair in Victoria, Cornwall
We travel to Victoria for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips on the rim or sides
- Rust spots around the plughole
Prices and what affects them
Repairs from £95. Each job gets its own fixed price. This is what makes a difference:
- Previous DIY repairs that have to come out
- How many areas need work
- Unusual colours or finishes
- What the surface is made of
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
- A picture taken from further back
- Whether it’s been repaired or coated before
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say immediately if a repair is the right fix.
How we handle bath repair in Victoria
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Whether it’s rust by the waste and overflow and snagging damage from a refit, we can generally put it right, on cast iron enamel, pressed steel enamel and roll-top & freestanding alike.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Victoria (PL26)
- Region
- Cornwall
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Victoria questions
Can you repair a hole in a bath?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Is repairing better than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send photos.
Can a cracked acrylic bath be fixed?
Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Landlords, agents and businesses in Victoria
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Housing associations and facilities teams use us for planned and reactive repairs in Cornwall and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
What a repair cannot fix
To be straight with you, some problems need a different fix:
- Acrylic cracks with no access behind them
- Leaking fittings, which need a plumber
- A bath that moves underfoot, until its support is fixed
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
Keeping it looking good
Simple care helps the repair last. Our advice:
- Ensure an acrylic bath is firm underfoot
- Store metal items away from the bath
- Put a towel in the bath if you are working above it
- Stick to mild cleaners and a soft cloth
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
Do you need bath repair in Victoria?
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Contact us if you’ve noticed any of these:
- A chipped rim or side
- A chip where the taps sit
- Rusty patches near the plughole
- Scuffs and scratches in the surface
Comparing quotes
- How changes to the job are handled
- How soon you can use it again
- The length of the guarantee and what it covers
- Who turns up on the day
What else we do in Victoria
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why book with us
- A year’s guarantee on all work
- Dust sheets down, tidy finish
- Work done at your home or business
- No need to remove anything
See our prices page and resurfacing vs replacement cost guide.
The process
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and we start. It normally takes a few hours, and we will tell you if anything changes.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the next day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
Get a quote
Upload pictures of the damage and a wider shot of the whole item, with your PL26 postcode, and we will reply with a fixed quote.
Read more
Victoria and the surrounding area
Victoria is about 6 miles south-west of Bodmin, in Cornwall. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Victoria is one of 644 places in Cornwall we cover.
Our visits in PL26 work the same way as everywhere else we cover. Streets in the area include Victoria Road and Penstraze Lane, all of which we cover. If you’re just outside Victoria, we cover Trebilcock (1 mile south), Roche (1 mile south), Trezaise (2 miles south), Rosehill (2 miles north-east) and Hallew (2 miles south-east). We also work in nearby towns such as Truro (15 miles south-west), Newquay (10 miles west), St Austell (6 miles south), Bodmin (6 miles north-east), Sandy Bottom (6 miles south-east) and Bethel (6 miles south-east).
What’s near Victoria
In Victoria, that means homes near Church of St Gomonda, The Victoria Inn and Roche Community Primary School. Victoria has its own railway station: Roche station. Other landmarks nearby include Bodmin Hospital (5.1 miles north-east). Green spaces nearby include Hensbarrow Beacon and Tresayes Quarry.
About our accreditations · Every repair comes with a one-year guarantee.
