North Somerset · England
Bath Repair in Walton Bay
Our technicians come to Walton Bay for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A kit repair that didn’t last
- Rust by the waste and overflow
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Bath repair at your home in Walton Bay
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Typical jobs include a cracked acrylic bath and rusty patches near the plughole, on acrylic, pressed steel enamel and roll-top & freestanding.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Area
- Walton Bay (BS21)
- Area hub
- North Somerset
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Cracks in acrylic we can’t reach from underneath
- Leaking fittings, which need a plumber
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send photos and we will say what we think before booking.
Materials we work on in Walton Bay
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
Towns and villages near Walton Bay
Also in Walton Bay
What affects the price in Walton Bay
Prices start from £95. There is no area surcharge for Walton Bay. What changes the price is:
- What kind of damage it is
- How easy the damage is to reach
- The material
- Whether old repairs or coatings need taking off
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Send photos for a quote
Good pictures mean an accurate price. Here’s what helps:
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- The material, if you know it
- Whether it’s been repaired or coated before
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Our work in Walton Bay
Walton Bay is about 3 miles north-east of Clevedon, in North Somerset. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Walton Bay is one of 86 towns and villages in North Somerset we cover. You can also see our page for Birmingham, about 80 miles away.
Our visits in BS21 work the same way as everywhere else we cover. We regularly work on streets such as Skylark Avenue, The Coast Path and Down Road and the roads around them. We also cover the places around Walton Bay: Walton in Gordano (1 mile south), Redcliffe Bay (1 mile north-east), Norton's Wood (1 mile south), Clevedon (3 miles south-west) and Kenn (3 miles south). Within a short drive, we also cover Weston-super-Mare (9 miles south-west), Portishead (3 miles north-east), Nailsea (4 miles south-east), Milton (9 miles south-west), Yatton (5 miles south) and Worle (9 miles south-west).
What’s near Walton Bay
Around Walton Bay, we work in homes near Church of St Paul and Clevedon School and the streets around them. Walton Bay’s nearest station is Nailsea & Backwell station, roughly 4.6 miles south-east. A little further out are North Somerset Community Hospital (2.2 miles south-west). For a walk, there’s Court Hill and Clapton Moor.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We regularly work with letting and managing agents. Send the address, photos and access details.
What we are called out for in Walton Bay
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
The most common problems we’re called about are:
- Holes from dropped items
- Damage done while the bathroom was being fitted
- A chipped rim or side
- A cracked acrylic bath
Questions to ask before you book
- Whether the price covers travel
- How the colour is matched
- Who will actually do the work
- What the guarantee covers, and for how long
What happens on the day
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a few hours. We tidy up before we leave and let you know when you can use it again.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the following day.
Before we arrive
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Related advice
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Have new chips seen to early
- Store metal items away from the bath
- Put a towel in the bath if you’re working above it
- Clean with warm water and a mild detergent
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Your questions about bath repair in Walton Bay
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
What information do you need?
Use the quote form or ring 0345 017 0787.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you work in Walton Bay?
We do. Repair technicians travel to Walton Bay from across the region, with no extra charge for travel.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
What does bath repair cost?
Prices start from £95. We give a fixed price based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.
Can you repair a hole in a bath?
Typically. Send us a picture of the hole and one from under the bath if you can.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
About our accreditations · Every repair comes with a one-year guarantee.
