North Somerset · England
Bath chip & crack repair in Kenn, North Somerset
Bath repair in and around Kenn: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A chip where the taps sit
- A hole punched through by something heavy
When we’d advise against a repair
A repair is not right for every job, including:
- Wear across the whole surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we can’t reach from underneath
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Kenn
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
How we handle bath repair in Kenn
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Common call-outs are for chips under the taps and an old repair that has yellowed or come loose, on cast iron enamel, acrylic and pressed steel enamel.
Every repair is covered by our one-year guarantee.
- Area
- Kenn (BS21)
- Area hub
- North Somerset
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
When to call us in Kenn
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Look out for these signs:
- A hole punched through by something heavy
- Damage beneath the taps
- Cracks in an acrylic bath
- Chips on the rim or sides
Questions to ask before booking
- Whether the price is fixed and includes VAT
- Who will actually do the work
- How to care for the finish
- What protection goes down before work starts
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Covering Kenn
Kenn is about 1 mile south-east of Clevedon, in North Somerset. Our technicians come to customers in Kenn and the surrounding area, so nothing has to leave your home. We cover all 86 towns and villages across North Somerset.
We cover every part of the BS21 postcode area. You will find streets such as Kenn Street, Duck Lane and Kenn Road. If you are just outside Kenn, we cover North End (1 mile south), Clevedon (1 mile north-west), Norton's Wood (2 miles north), Walton in Gordano (3 miles north) and Walton Bay (3 miles north). Within a short drive, we also cover Weston-super-Mare (7 miles south-west), Portishead (5 miles north-east), Nailsea (3 miles east), Milton (6 miles south-west), Worle (6 miles south-west) and Locking (6 miles south-west).
Local landmarks in Kenn
Around Kenn, we work in homes near Yeo Moor Primary School, Church of St John the Evangelist and Drum & Monkey pub and the streets around them. Nearby too are Saint Andrews Infants School (1.4 miles north) and Clevedon School (2.1 miles north). Kenn’s nearest station is Yatton station, roughly 1.9 miles south. Nearby you will also find North Somerset Community Hospital (1.4 miles north) and Castle Batch (4.9 miles south-west). For a walk, there’s Blake's Pools and Backwell Lake.
Landlords, agents and businesses in Kenn
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Repairing versus replacing in Kenn
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why Kenn clients choose us
- Nothing taken out or refitted
- Fixed prices from your photos
- We leave the room as we found it
- We will tell you if it’s not worth repairing
See our prices page or resurfacing vs replacement cost guide.
Prices and what affects them
Repairs from £95. We give every job a fixed price from pictures. This is what makes a difference:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- The material
- How much damage there is
The price reflects the work involved, not your postcode. The full price is agreed before booking.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what helps:
- The postcode, so we can plan the visit
- Something in shot to show the size
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Nearby places to Kenn
What else we do in Kenn
The process
We agree an arrival time beforehand. On site, it takes a few hours. We leave the room clean.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the next day.
How to prepare
- Keep pets and children out of the room while we work
- Clear the area around the damage
- Open a window if you can
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Related advice
Kenn: your questions answered
It’s been repaired before. Can you still fix it?
Generally, yes. The old repair comes out first, so let us know about it.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
What do you need from me?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Something went through my bath. Can it be fixed?
In most cases. Send us a picture of the hole and one from under the bath if you can.
About our accreditations · Every repair comes with a one-year guarantee.
