Kent · England
Bath chip & crack repair in Ware, Kent
Chip and crack repairs to enamel, acrylic and cast iron baths in Ware, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rusty patches near the plughole
- Chips along the edge of the bath
How we handle bath repair in Ware
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We regularly repair whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and the jobs we see most are a kit repair that didn’t last and impact holes in acrylic.
You get a one-year guarantee, the same in Ware as everywhere else we work.
- Area
- Ware (CT3)
- County
- Kent
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Repairs from £95. Each job gets its own fixed price. These are the things that affect it:
- Unusual colours or finishes
- Any earlier repairs that need removing first
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Phone pictures are fine, there’s no need for anything special. Ensure they show:
- One sharp close-up of the damage
- Whether it’s been repaired or coated before
- Natural light rather than flash
- A coin beside the damage so we can judge size
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Honest limits
We will not take on work that won’t last, so here’s what a repair cannot put right:
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Ware and nearby
Ware is about 6 miles south-west of St Lawrence, in Kent. From the centre of Ware to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in all 922 towns and villages across Kent. Our jobs stretch from Ware to London (about 60 miles away).
Jobs in CT3 are booked in the same way as anywhere else. We also cover the places around Ware: Westmarsh (1 mile north), East Stourmouth (2 miles north-west), Preston (2 miles west), West Stourmouth (2 miles north-west) and Hoo (3 miles north-east). Further out, we also cover Canterbury (8 miles west), Margate (7 miles north-east), Dover (11 miles south), Ramsgate (7 miles north-east), Broadstairs (8 miles north-east) and Whitstable (11 miles west).
Near you in Ware
Typical jobs here are in homes near The Way Out Inn. The nearest railway station is Minster station, roughly 2.9 miles north-east. Well-known places in the area include White Mill (2.9 miles south-east). For a walk, there’s Monk's Wall nature reserve.
Do you need bath repair in Ware?
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Clients typically contact us about:
- Hairline or through cracks in acrylic
- Scuffs and scratches in the surface
- Snagging damage from a refit
- A failed DIY repair that is discoloured or lifting
Comparing quotes
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
- How long it needs to cure
- Who will actually do the work
Towns and villages near Ware
What else we do in Ware
Your questions about bath repair in Ware
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Something went through my bath. Can it be fixed?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Looking after it afterwards
To keep it looking its best:
- Give the bath a quick rinse after use
- If an acrylic bath flexes, have its feet adjusted
- Keep abrasive pads and gritty cleaners away from the bath
- Store metal items away from the bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Landlords, agents and businesses in Ware
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes two to three hours for most chips. We clean up when we’re done and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
- Mention any parking restrictions or tricky access
Ask for a price
Send us a photo of the damage and a wider shot of the whole item, with your CT3 postcode, and we’ll come back with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
