North Yorkshire · England
Bath chip & crack repair in Wass, North Yorkshire
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Wass. Free, fixed quotes from your photos.
- Repairs from £95
- A kit repair that didn’t last
- Snagging damage from a refit
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
How we handle bath repair in Wass
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can usually use the bath the day after. Typical jobs include a hole punched through by something heavy and rust spots around the plughole, in roll-top & freestanding, acrylic and cast iron enamel.
Whatever the size of the job, it’s backed by a one-year guarantee in Wass and across North Yorkshire.
- Where
- Wass (YO61)
- Area hub
- North Yorkshire
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Wass
Prices start from £95. Prices are worked out job by job. What matters most is:
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- Unusual colours or finishes
- Where the damage is and how we get to it
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
You can normally get a fixed quote without us visiting. To make it quick:
- One picture of the whole bath
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- Natural light rather than flash
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Keeping it looking good
Once the work has cured, treat it gently:
- Rinse the bath after use, especially in hard water areas
- Use a soft cloth and washing-up liquid for everyday cleaning
- Protect the bath with a towel when doing jobs nearby
- Don’t leave a fresh chip for long
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Nearby places to Wass
Also in Wass
Your questions about bath repair in Wass
Are there extra charges for Wass?
No. Our quotes include travel, and we charge the same wherever you are.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send photos.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
What do you need from me?
Photos of the damage, a picture of the whole bath and your postcode. Then we will agree a date.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
What we do, step by step
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for a few hours, depending on the damage from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Before we arrive
- Keep a parking space free if you can
- Let us know if it has been repaired before
- Tell us about parking, stairs or access
Getting a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Related advice
Should you replace it?
Replacing a fitted bath normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Prices start from £95. Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- Repair technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- Every repair guaranteed for a year
- Honest advice, even when it means no job
See our prices page and resurfacing vs replacement cost guide.
Where we work around Wass
Wass is about 15 miles south-east of Northallerton, in North Yorkshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Wass is one of 626 places in North Yorkshire where we work. Our jobs stretch from Wass to Leeds (32 miles away).
Our visits in YO61 are booked in the same way as anywhere else. Local streets include Wass Bank Road and Hambleton Lane, all of which we cover. If you are just outside Wass, we cover Ampleforth (2 miles south-east), Coxwold (2 miles south-west), Kilburn (3 miles west), Oulston (3 miles south-east) and Husthwaite (3 miles south-west). We also work in nearby towns such as Northallerton (15 miles north-west), Malton (15 miles east), Pickering (15 miles east), Thirsk (8 miles west), Easingwold (6 miles south) and Sowerby (8 miles west).
Landmarks near Wass
Typical jobs here are in homes near The Stapylton Arms and St Thomas and the streets around them. Nearby you will also find Gilling Castle (3.8 miles south-east). Not far away are Sutton Bank and Gormire Lake.
Common problems we fix in Wass
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
Clients normally contact us about:
- Damage done while the bathroom was being fitted
- Hairline or through cracks in acrylic
- A chip where the taps sit
- Deep scratches in acrylic
What to look for in a quote
- Whether the price is fixed and includes VAT
- What prep work is covered
- Whether the colour is mixed to match
- When it can be used again
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
