Flintshire · England
Bath Repair for Wern-y-gaer homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Wern-y-gaer, carried out at your home and guaranteed for a year.
- Repairs from £95
- A chipped rim or side
- Damage beneath the taps
Wern-y-gaer questions
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
What happens next?
We review the photos and send a fixed quote with dates.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Bath repair at your home in Wern-y-gaer
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We regularly repair roll-top & freestanding, cast iron enamel and pressed steel enamel, and common reasons people get in touch are rusty patches near the plughole and a chip where the taps sit.
Every repair comes with a one-year guarantee, wherever you are in Flintshire.
- Area
- Wern-y-gaer (CH7)
- Region
- Flintshire
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Prices start from £95. There is no charge for travel to Wern-y-gaer. The price depends on:
- Doing more than one item at once
- Access to the area
- What the surface is made of
- Any earlier repairs that need removing first
The price reflects the work involved, not your postcode. The full price is agreed before you book.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- What it’s made of, if you know
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
About Wern-y-gaer
Wern-y-gaer is about 3 miles south-west of Flint, in Flintshire. Anywhere in CH7, we come to you. We work in 139 places across Flintshire, from the larger towns to small villages. Our jobs stretch from Wern-y-gaer to Liverpool (about 17 miles away).
All of CH7 is covered, from the main roads to the quietest streets. If you’re just outside Wern-y-gaer, we cover Berth-ddu (1 mile north-east), Rhosesmor (1 mile south-east), Halkyn (1 mile north), Mynydd y Fflint (2 miles east) and Llan-eurgain (2 miles east). Within a short drive, we also cover Connah's Quay (5 miles east), Buckley (5 miles south-east), Bwcle (6 miles south-east), Flint (3 miles north-east), Saltney (11 miles east) and Mold (4 miles south-east).
Around Wern-y-gaer
In Wern-y-gaer, that means homes near Ysgol Rhos Helyg, The Red Lion Inn and St Paul's Church, among other places. The closest station to Wern-y-gaer is Flint station, roughly 3.5 miles north-east of the centre. Well-known places in the area include Mold Community Hospital (3.4 miles south-east) and Moel-y-crio (0.7 miles north-west). Open spaces near Wern-y-gaer include Deeside Nature Reserve and Moel y Gaer.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Use a soft cloth and washing-up liquid for everyday cleaning
- If an acrylic bath flexes, have its feet adjusted
- Do not leave a fresh chip for long
- Do not leave razors or cans standing in the bath
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Towns and villages near Wern-y-gaer
More services for Wern-y-gaer
When to call us in Wern-y-gaer
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Send us a picture if you notice any of these:
- Damage done while the bathroom was being fitted
- A cracked acrylic bath
- A failed DIY repair that’s discoloured or lifting
- A chip where the taps sit
What to look for in a quote
- Aftercare advice
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
- The length of the guarantee and what it covers
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes two to three hours for most chips. If we find something your pictures didn’t show, we will explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the following day.
Preparing for the visit
- Ensure the room can be ventilated
- Let us know which floor the room is on
- Keep a parking space free if you can
How to get a price
If you’re in Wern-y-gaer and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Why Wern-y-gaer clients choose us
- Dust sheets down, tidy finish
- One price list for the entire UK
- Everything repaired in place
- We come to you, anywhere in the UK
Read our pricing or resurfacing vs replacement cost guide.
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair can’t fix:
- A bath that moves underfoot, until its support is fixed
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaking fittings, which need a plumber
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
