Staffordshire · England
Bath chip & crack repair in Westwood, Staffordshire
Bath repair in and around Westwood: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Scuffs and scratches in the surface
Bath repair in Westwood without replacing anything
Most of our bath repairs take a few hours, and the bath is back in use the day after. There’s no need to book a plumber or tiler, because the bath does not move. Common call-outs are for impact holes in acrylic and chips caused by builders, in cast iron enamel, pressed steel enamel and whirlpool & spa baths.
All of our repairs are guaranteed for twelve months in Westwood and everywhere else. We return to put right any problem with the work.
- Area
- Westwood (ST13)
- County
- Staffordshire
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Westwood
Westwood is about 1 mile west of Leek, in Staffordshire. Anywhere in ST13, we carry out the work at your property. Westwood is one of 512 places in Staffordshire where we work. Our nearest city page is Manchester, about 27 miles away.
Postcode districts we cover here: ST13. We regularly work on streets such as Kiln Lane, Beggars Lane and North Avenue and the roads around them. Nearby, we also work in Bridge End (1 mile north-east), Leek (1 mile east), Poolend (1 mile north), Abbey Green (1 mile north-east) and Harper's Gate (1 mile north-west). We also work in nearby towns such as Newcastle-under-Lyme (10 miles south-west), Longton (9 miles south-west), Stone (15 miles south), Biddulph (5 miles west), Alsager (11 miles west) and Kidsgrove (8 miles west).
Landmarks near Westwood
Typical jobs here are in homes near Westwood College, Dyers Arms and Westwood First School and the streets around them. A little further out are St Edward's Hospital (1.6 miles south) and Brindley Mill And James Brindley Museum (0.7 miles north-east). Green spaces nearby include Coombes Valley RSPB reserve and Gun.
What we are called out for in Westwood
A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.
If you can see any of these, send us a picture:
- Impact holes in acrylic
- Snagging damage from a refit
- Rusty patches near the plughole
- Damage beneath the taps
Questions to ask before you book
- Is the price fixed, and does it include VAT?
- How changes to the job are handled
- Whether the price covers travel
- What protection goes down before work starts
Landlord and trade work in Westwood
If you manage property in Westwood, we’ll quote for several properties at once. Send pictures for each one and we will price them together.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take a few hours, including clearing up.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the next day.
How to prepare
- Have a window or extractor fan available
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
How to get a price
To get a price, send two or three pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Advice
Also near Westwood
Also in Westwood
Westwood questions
Can you price it without visiting?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Prices and what affects them
Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:
- Access to the area
- What the surface is made of
- How many areas need work
- What kind of damage it is
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Send photos for a quote
When you take your photos, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- A picture taken from further back
- The material, if you know it
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Get any new chip repaired before it rusts
- Fix dripping taps early to stop staining and limescale
- Check that an acrylic bath doesn’t move when you stand in it
- Keep metal cans and razors off the surface
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
