Birmingham · England
Bath chip & crack repair in Witton, Birmingham
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Witton and across Birmingham. Free, fixed quotes from your pictures.
- Repairs from £95
- Impact holes in acrylic
- Chips on the rim or sides
About our bath repair in Witton
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. Whether it’s cracks in an acrylic bath and a hole punched through by something heavy, we can help.
Every repair comes with a one-year guarantee, wherever you are in Birmingham.
- Area
- Witton (B6, B23, B20)
- Area hub
- Birmingham
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:
- The colour and finish to match
- Access to the area
- Previous DIY repairs that have to come out
- How many areas need work
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
How to get a fixed quote
Before you send photos, these tips help us give you a firm price:
- A close-up of the damage, in focus
- Details of any past repairs
- One picture of the whole bath
- What it’s made of, if you know
To get a price, send two or three pictures through our quote form or call us. We will say right away if a repair is the right fix.
About Witton
Witton is about 2 miles west of Erdington, in Birmingham. Whether you are in the middle of Witton or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Witton is one of 140 places in Birmingham we cover.
Jobs in B6, B23 and B20 work the same way as everywhere else we cover. We regularly work on streets such as Birch Road, Oscott Road and Wyrley Road. Nearby, we also work in Stockland Green (1 mile east), Perry Common (1 mile north-east), Aston (1 mile south), Short Heath (1 mile north-east) and Gravelly Hill (1 mile east). Larger places within reach include Birmingham (3 miles south), Royal Sutton Coldfield (4 miles north-east), Lee Bank (4 miles south), Cape Hill (4 miles south-west), Streetly (4 miles north) and Paradise (3 miles south).
What’s near Witton
We visit homes around Eden Boys' School, Stockland Green School and Perry Park, among other places. Other local landmarks include Deykin Avenue Junior and Infant School (0.5 miles south-east), All Souls' (0.6 miles south) and Boars Head pub (0.8 miles north-west). Witton’s nearest station is Witton station, roughly 0.5 miles south of the centre. Well-known places in the area include Museum of the Jewellery Quarter (2.3 miles south-west) and One Stop Shopping Centre (0.8 miles west). For a walk, there’s Queslett Nature Reserve and Barr Beacon.
- Other local spots include Aston Manor (1.4 miles south)
Nearby places to Witton
Also in Witton
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
How to care for the repair
Looking after the surface is easy:
- Don’t leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
- Clean with warm water and a mild detergent
- Check that an acrylic bath does not move when you stand in it
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Common problems we fix in Witton
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
People normally call us when they notice one of these:
- Scuffs and scratches in the surface
- Chips on the rim or sides
- Rusty patches near the plughole
- Damage beneath the taps
What your quote should include
- How soon you can use it again
- How your room will be protected
- Aftercare advice
- Who turns up on the day
For landlords and businesses
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Witton, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
What we cannot put right
A repair is not right for every job, including:
- A steel bath rusted through
- Cracks in acrylic we can’t reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
How it works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a few hours. The room is left tidy and ready to use once it has cured.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Ensure the room can be ventilated
- Make sure the area is dry
- Mention any earlier repairs or resurfacing
How to get a price
Send us photos of the damage and one of the entire item, and tell us you’re in Witton, and we will reply with a fixed price.
Advice
Witton questions
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you redo an old repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
What happens next?
You will get a fixed quote back, plus dates. You’re under no obligation.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we’ll plan for it.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you work in Witton?
Yes, we do. Repair technicians travel to Witton from across the region, with no extra charge for travel.
Is there any odour?
There may be a mild smell during the work.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
About our accreditations · Every repair comes with a one-year guarantee.
