Shropshire · England
Bath Repair in Wollerton
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Wollerton. Send pictures for a free, fixed quote.
- Repairs from £95
- A chipped rim or side
- Damage done while the bathroom was being fitted
Wollerton: your questions answered
Do you come to Wollerton?
Yes. We work across the UK and travel to Wollerton and the rest of Shropshire. Send pictures and we will quote, or call 0345 017 0787.
Can you price it without visiting?
Generally, yes. Clear photos let us give you a fixed price without visiting.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How do I get a price for bath repair in Wollerton?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
How we handle bath repair in Wollerton
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for rusty patches near the plughole and holes from dropped items, on cast iron enamel, pressed steel enamel and roll-top & freestanding.
Every job is backed for twelve months in Wollerton and everywhere else. We return to put right any problem with the work.
- Area
- Wollerton (TF9)
- County
- Shropshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Wollerton
What else we do in Wollerton
What we are called out for in Wollerton
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Keep an eye out for these signs:
- Chips under the taps
- Cracks in an acrylic bath
- Chips caused by builders
- Chips along the edge of the bath
Questions to ask before booking
- Whether the price covers travel
- How changes to the job are handled
- Whether a trained technician does the job
- How soon you can use it again
How the visit works
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a morning or an afternoon. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Honest limits
In fairness, there are a few things a repair will not fix:
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Prices and what affects them
Prices start from £95. We do not charge extra for travel to Wollerton. The price comes down to:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- Whether old repairs or coatings need taking off
A repair usually costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- One picture of the whole bath
- Whether it’s been repaired or coated before
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Where we work around Wollerton
Wollerton is about 4 miles south-west of Market Drayton, in Shropshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Our repair technicians cover all 433 towns and villages in Shropshire. Our nearest city page is Birmingham, about 39 miles away.
Every address in TF9 is within our area. We regularly work on streets such as Wood Lane and Mill Road. Neighbouring places we cover include Mickley (1 mile north), Marchamley Wood (1 mile north-west), Hodnet (1 mile south), Stoke Heath (1 mile east) and Marchamley (2 miles south-west). Within a short drive, we also cover Shrewsbury (14 miles south-west), Market Drayton (4 miles north-east), Coleham (14 miles south-west), Kingsland (14 miles south-west), Whitchurch (8 miles north-west) and Belle Vue (14 miles south-west).
Around Wollerton
Other landmarks nearby include Red Castle (3.3 miles west) and Market Drayton Museum And Resource Centre (3.8 miles north-east). The countryside around Wollerton includes Quarry Wood and Hawk Lake.
Why repair rather than replace?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.
What you get with us
- We leave the room as we found it
- No need to remove anything
- Work done at your home or business
- Colour mixed on the day to match
See our prices page and bath cost comparison.
Keeping it looking good
Once the work has cured, treat it gently:
- Fix dripping taps early to stop staining and limescale
- Avoid scourers, wire wool and gritty cream cleaners
- Do not leave a fresh chip for long
- Store metal items away from the bath
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
