North Lanarkshire · Scotland

Bath & shower resealing (mastic) in Allanton, North Lanarkshire

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Allanton and across North Lanarkshire. Free, fixed quotes from your photos.

  • Damp near the bath
  • Silicone smeared on tiles
  • Stained silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Allanton

Our work in Allanton

Allanton is about 4 miles north-east of Wishaw, in North Lanarkshire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. Allanton is one of 89 towns and villages in North Lanarkshire where we work. Our nearest city page is Glasgow, about 17 miles away.

All of ML7 is covered, from the main roads to the quietest streets. Whether you live on Mill Road, Wilson Road and Allanton Road or anywhere nearby, we can come to you. If you’re just outside Allanton, we cover Bonkle (1 mile south-west), Crindledyke (2 miles south-west), Newmains (2 miles south-west), Morningside (2 miles south-west) and Chapel (2 miles south-west). Within a short drive, we also cover Motherwell (6 miles west), Cumbernauld (12 miles north-west), Coatbridge (8 miles north-west), Airdrie (7 miles north-west), Wishaw (4 miles south-west) and Bellshill (7 miles west).

Around Allanton

In Allanton, that means homes near Bonkle Parish Church, among other places. The nearest railway station is Hartwood station, roughly 0.8 miles north. A little further out are Cleland Hospital (2.8 miles west) and Shotts Heritage Centre (2.2 miles north-east). The countryside around Allanton includes Allanton House lake.

Map of Allanton © OpenStreetMap contributors

How we handle bath resealing in Allanton

Baths are resealed with water in them, so the joint is at its widest, which stops the new seal tearing the first time the bath is used. We’re frequently asked to fix discoloured, yellow sealant and black mould in the sealant, on kitchen worktops & sinks, baths and basins & vanity units.

Big or small, it’s backed by a one-year guarantee in Allanton and across North Lanarkshire.

Location
Allanton (ML7)
County
North Lanarkshire
Cover
A year, on every repair
Quotes
Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Honest limits

A repair isn’t right for every job, including:

  • Tiles that move, until they’re refixed
  • Very wide gaps that need a trim
  • Hidden water damage

Send us photos and we will tell you honestly before booking.

What we work on

  • Kitchen worktops & sinks
  • Wet rooms
  • Basins & vanity units
  • Baths
  • Shower trays & enclosures

Do you need bath resealing in Allanton?

No sealant lasts for ever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint moves slightly every time the bath is filled.

Look out for any of the following:

  • Missing sealant behind the taps
  • Leaks at the edges
  • A messy previous reseal
  • Old sealant that looks dirty

What your quote should include

  • Aftercare advice
  • What protection goes down before work starts
  • How soon you can use it again
  • A fixed quote, and whether VAT is included

10 questions to ask before you book

For landlords and businesses

We work for landlords, letting agents and housing providers in Allanton as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

How it works

We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a couple of hours in most cases. We leave the room clean and you’ll know when it can be used.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. New mould-resistant silicone is applied and tooled neatly.

Preparing for the visit

  • Open a window if you can
  • Keep pets and children out of the room while we work
  • Avoid using the area for a few hours before we arrive

Getting a price

You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

Get a fixed price

Related advice

FAQs for Allanton

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Do you come to Allanton?

We do. We send a technician to Allanton for every job, and the price is the same as everywhere else.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

What happens once I’ve sent photos?

We come back with a fixed price, plus dates. You are under no obligation.

What does bath resealing cost?

Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your ML7 postcode.

What if the damage is worse than the photos show?

Your quote covers the damage in the photos. If there’s more, we will tell you before starting.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Resealing in Allanton: why it matters

A professional reseal costs little compared with water damage. It’s a quick job that protects your walls and floors. Compared with replacing, repairing normally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why choose Surface Doctor in Allanton

  • A year’s guarantee on all work
  • CHAS, Constructionline and SafeContractor accredited
  • Everything repaired in place
  • Dust sheets down, tidy finish

Read our pricing.

What your bath or shower is made of matters

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Baths

Baths are resealed with water in them, so the joint is at its widest.

Can I fix it myself?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

What bath resealing costs

You will not pay by the hour. The price is based on:

  • Whether it’s a chip, crack, burn or wear
  • The size and number of damaged areas
  • Whether we combine several jobs
  • Whether old repairs or coatings need taking off

The price reflects the work involved, not your postcode. The full price is agreed before booking.

Getting a price from pictures

The better the photos, the more accurate the price. Here’s what helps:

  • A wider photo showing the whole bath or shower
  • A clear, close picture of the problem area
  • The material, if you know it
  • Whether it’s been repaired or coated before

To get a price, send two or three photos through our quote form or call us. We will tell you honestly if a repair is the right fix.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.