Flintshire · England

Bath & shower resealing (mastic) in Aston, Flintshire

We travel to Aston for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.

  • Missing sealant behind the taps
  • Water getting behind the bath or tray
  • Sealant that is split or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Aston?

How we handle bath resealing in Aston

We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. We’re frequently asked to fix sealant that’s split or lifting and leaks at the edges, in kitchen worktops & sinks, baths and basins & vanity units.

Big or small, it’s backed by a one-year guarantee in Aston and across Flintshire.

Roll-top bath being refinished by a Surface Doctor technician
Area
Aston (CH5)
Region
Flintshire
Cover
One year on every repair
Quotes
Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026

Aston and the surrounding area

Aston is about 2 miles south-east of Connah's Quay, in Flintshire. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. We work in 139 places across Flintshire, from the larger towns to small villages. Our jobs stretch from Aston to Liverpool (15 miles away).

Postcode districts we cover here: CH5. Local streets include Elm Road, Rowan Road and Hawthorn Close, and we cover them all. We also cover the places around Aston: Ewloe (1 mile south-west), Big Mancot (1 mile east), Hawarden (1 mile south), Little Mancot (1 mile south-east) and Mancot Royal (1 mile east). Within a short drive, we also cover Buckley (3 miles south-west), Bwcle (3 miles south-west), Flint (5 miles north-west), Saltney (5 miles east), Mold (5 miles south-west) and Holywell (9 miles north-west).

Landmarks near Aston

Around Aston, we work in homes near St Ethelwold's Primary School, Gladstone's Library and Hawarden High School, among other places. You will also find Church of the Holy Spirit (under half a mile south-west), The Plough Inn (under half a mile north-east) and Wepre Park (0.8 miles north-west). The closest station to Aston is Hawarden station, roughly 1 mile south-east. Nearby you will also find Deeside Community Hospital (under half a mile north) and Broughton Shopping Park (3.5 miles south-east). Not far away are Deeside Nature Reserve and Prenbrigog.

  • Parks and local facilities nearby include West Saltney (1.9 miles east)
Map of Aston © OpenStreetMap contributors

When to call us in Aston

In time, even good sealant discolours particularly in a well-used bathroom. Steam, soap and movement all wear it down.

Send us a picture if you notice any of these:

  • Black mould in the sealant
  • Silicone smeared on tiles
  • Leaks at the edges
  • Missing sealant behind the taps

What to look for in a quote

  • How your room will be protected
  • How long it needs to cure
  • Who turns up on the day
  • What the guarantee covers, and for how long

Choosing a repair company

What happens on the day

We agree an arrival time beforehand. On site, it takes about two hours for a bath for most jobs. We leave the room clean.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Preparing for the visit

  • Have a window or extractor fan available
  • Clear the area around the damage
  • Let us know if it has been repaired before

How to get a price

There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Get a fixed price

Advice

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

What your bath or shower is made of matters

Shower trays

We put weight on a tray before sealing it, for the same reason.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

How to care for the repair

How the surface is treated afterwards matters. Here’s what we suggest:

  • Use the extractor fan
  • Clean the joints with a mild cleaner
  • Air the room after use
  • Replace the seal when mould sets in

Let it cure fully before using the bath or shower, normally about a day.

Damp below or loose tiles need checking quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.

Resealing in Aston: why it matters

A reseal is one of the cheapest bathroom jobs there is. Leaving failed sealant can let water cause damage that costs far more to fix. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why book with us

  • Rooms protected and left tidy
  • Technicians who travel to you, UK-wide
  • Accredited with CHAS, Constructionline and SafeContractor
  • Honest advice, even when it means no job

See our full price list.

What bath resealing costs

There’s no area surcharge for Aston. The price reflects:

  • The material and finish
  • Access to the area
  • Doing more than one item at once
  • Previous DIY repairs that have to come out

A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

How to get a fixed price

Before you send photos, these tips help us give you a firm price:

  • A clear, close picture of the problem area
  • Any details about the material
  • Good light, ideally daylight, without flash glare
  • A wider photo showing the entire bath or shower

The quickest way to a price is to send two or three photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.

For landlords and businesses

If you manage property in Aston, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Your questions about bath resealing in Aston

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum.

How do I get a price for bath resealing in Aston?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

What happens if you find more damage?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Is it worth repairing rather than replacing?

Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Why does my sealant keep splitting?

Movement is the usual cause. We fill the bath before sealing it.

Is the work guaranteed?

All our work carries a one-year guarantee. We will explain what it covers when we quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.