Staffordshire · England
Bath & shower resealing (mastic) in Belgrave, Staffordshire
Bath resealing in Belgrave without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Damp near the bath
- Gaps in the seal
- Silicone smeared on tiles
Aftercare tips
Most damage we see is avoidable. These habits help:
- Replace the seal when mould sets in
- Let steam out after showers
- Use the extractor fan
- Clean the sealant gently and regularly
Leave the sealant to cure for the time we give you, normally about a day.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
About our bath resealing in Belgrave
The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. If you are dealing with black spots in the silicone and discoloured, yellow sealant, we can help, on kitchen worktops & sinks, basins & vanity units and shower trays & enclosures alike.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Belgrave (B77)
- County
- Staffordshire
- Cover
- One year on every repair
- Quotes
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Belgrave: your questions answered
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
How long will it take?
A bath or shower normally takes a couple of hours. Leave it to cure before use.
Can you repair something that’s been repaired before?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
How do I stop mould in sealant?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
What happens after I send pictures?
We review the photos and send a fixed quote.
How long does silicone take to cure?
You’ll get the curing time from us, typically around a day.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Covering Belgrave
Belgrave is about 1 mile south of Tamworth, in Staffordshire. Clients in Belgrave get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Belgrave is one of 512 towns and villages in Staffordshire we cover. Our jobs stretch from Belgrave to Birmingham (about 14 miles away).
Every address in B77 is covered, from the main roads to the quietest streets. From Leven Road, Leyland Road and Lindores Road or anywhere nearby, a technician can come to you. Main roads around Belgrave include the A5, so getting to you is simple. Close by, we cover Glascote (1 mile north-east), Bolehall (1 mile west), Wilnecote (1 mile south), Tamworth (1 mile north) and Stonydelph (1 mile east). Larger places within reach include Burton upon Trent (13 miles north), Cannock (15 miles west), Lichfield (8 miles north-west), Rugeley (15 miles north-west), Burntwood (11 miles west) and Hednesford (15 miles north-west).
Around Belgrave
Typical jobs here are in homes near St Gabriel's Catholic Primary School, St Peter's Community Church and Tamworth Enterprise College and AET Academy. You’ll also find Queen's Head Inn Public House (0.8 miles south-east) and Tamworth Enterprise College (less than half a mile south-east). Belgrave’s nearest station is Wilnecote station, roughly 0.6 miles south-west of the centre. Other landmarks nearby include Sir Robert Peel Community Hospital (2.1 miles west) and Tamworth Castle (1.4 miles north-west). For a walk, there’s Middleton Lakes RSPB reserve.
More services for Belgrave
What affects the price in Belgrave
A fixed quote means you know the cost before you book. We take into account:
- How hard the colour is to match
- Previous DIY repairs that have to come out
- Access to the area
- The material
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
How to get a fixed quote
It only takes a minute to photograph the damage. Please include:
- Whether it’s been repaired or coated before
- One picture of the whole bath or shower
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower, add your postcode and send them over. You will get a fixed price, not an estimate.
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take about two hours for a bath. We clean up when we are done and tell you when it’s ready to use.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
Before we arrive
- Have a window or extractor fan available
- Move bottles, mats and clutter away from the area
- Let us know which floor the room is on
Get a quote
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
Why reseal now?
Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
- One visit for most repairs
- One price list for the whole UK
Take a look at our prices page.
Signs you need bath resealing in Belgrave
Sealant doesn’t last forever. Every bath or shower adds moisture and soap residue, which mould feeds on, and the joint moves slightly every time the bath is filled.
Signs it’s time to call us include:
- Old sealant that looks dirty
- Black spots in the silicone
- Sealant that is split or lifting
- Damp near the bath
Before you book anyone
- Who turns up on the day
- When it can be used again
- How the room is protected while they work
- Whether the colour is mixed to match
Work for landlords and builders
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Repairs by material
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
Baths are resealed with water in them, to open the joint fully.
About our accreditations · Every repair comes with a one-year guarantee.
