Staffordshire · England
Bath Resealing for Wilnecote homes
Bath, shower and sink resealing with new mould-resistant silicone in Wilnecote, carried out at your home and guaranteed for a year.
- Mould you cannot clean out
- Water getting behind the bath or tray
- Unsealed corners
Bath resealing in Wilnecote without replacing anything
Baths are resealed with water in them, so the joint is at its widest, so the seal doesn’t tear when the bath is first used. If you’re dealing with an untidy old seal and missing sealant behind the taps, we can generally put it right, on basins & vanity units, wet rooms and shower trays & enclosures alike.
Whatever the size of the job, it’s backed by a one-year guarantee in Wilnecote and across Staffordshire.
- Location
- Wilnecote (B77)
- County
- Staffordshire
- Cover
- 12 months on all our work
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Wilnecote
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Materials and what they mean for the repair
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.
Why it’s worth resealing in Wilnecote
A reseal is one of the cheapest bathroom jobs there is. Leaving failed sealant can let water cause damage that costs far more to fix. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- A fixed quote before you book
- No extra charge for your area
- We come to you, anywhere in the UK
- We leave the room as we found it
Read our prices page.
Do you need bath resealing in Wilnecote?
Joints split if the bath or tray moves, often because it was sealed while the bath was empty.
Common reasons people in Wilnecote contact us are:
- Silicone coming away from the tiles
- Damp near the bath
- Mould you cannot clean out
- Missing sealant behind the taps
What to look for in a quote
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the photos show
- Whether cleaning and preparation are in the price
- How your room will be protected
Wilnecote and the surrounding area
Wilnecote is about 2 miles south of Tamworth, in Staffordshire. We visit clients in Wilnecote, so you do not need to take anything anywhere. Wilnecote is one of 512 places in Staffordshire where we work. Our jobs stretch from Wilnecote to Birmingham (about 13 miles away).
Here we cover the B77 postcode area. Local streets include Leven Road, Arden Road and Lagoon Road. If you are just outside Wilnecote, we cover Belgrave (1 mile north), Stonydelph (1 mile north-east), Glascote (1 mile north), Bolehall (1 mile north-west) and Tamworth (2 miles north). We also work in nearby towns such as Burton upon Trent (14 miles north), Lichfield (8 miles north-west), Rugeley (15 miles north-west), Burntwood (12 miles north-west), Horninglow (15 miles north) and Stowe (9 miles north-west).
Near you in Wilnecote
We visit homes around The Wilnecote School, Queen's Head Inn Public House and Tamworth Enterprise College. Other local landmarks include Wilnecote Junior School (within half a mile south-east) and Church of Holy Trinity (under half a mile north). Wilnecote’s nearest station is Wilnecote station, roughly 0.5 miles west of the centre. Well-known places in the area include Tamworth Castle (2.1 miles north-west) and The Bryans Museum (1.9 miles west). The countryside around Wilnecote includes Middleton Lakes RSPB reserve.
More services for Wilnecote
What we do, step by step
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Allow a couple of hours from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We cut out and remove all of the old sealant.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
Preparing for the visit
- Make sure the area is dry
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
Get a quote
Send us a photo of the damage and one of the entire item, and tell us you are in Wilnecote, and we’ll reply with a fixed quote.
Read more
What we can’t put right
We’ll always be straight with you, so here’s what a repair cannot fix:
- Very wide gaps that need a trim
- Tiles that move, until they’re refixed
- Hidden water damage
Send us photos and we will tell you honestly before you book.
What we work on
- Wet rooms
- Kitchen worktops & sinks
- Baths
- Shower trays & enclosures
- Basins & vanity units
Questions from Wilnecote
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you reseal over the old silicone?
Never over old. It’s removed, cleaned off and the joint dried first.
Do you work in Wilnecote?
Yes. We work across the UK and come to Wilnecote. Send photos and we’ll quote, or call 0345 017 0787.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
How to look after the repair
Looking after the surface is easy:
- Air the room after use
- Ventilate the bathroom well
- Do not stand toiletries on the seal
- Keep the joints dry
Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we will say if you need a builder or plumber.
About our accreditations · Every repair comes with a one-year guarantee.
