Wiltshire · England
Bath & shower resealing (mastic) in Bemerton, Wiltshire
Fixed-price bath resealing in Bemerton and the surrounding area, usually in one visit and guaranteed for a year.
- Damp near the bath
- An untidy old seal
- Gaps in the seal
Bath resealing in Bemerton without replacing anything
Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. Whether it’s leaks at the edges and sealant that’s split or lifting, we can normally put it right, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Bemerton (SP2, SP5, SP1)
- Area hub
- Wiltshire
- Warranty
- A year, on every repair
- Quotes
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
It helps to know what we can’t do too:
- Hollow or loose tiles
- Rotten walls or floors behind the bath
- Gaps so wide they need filling or trims before sealing
Send us photos and we’ll tell you honestly before booking.
What we work on
- Basins & vanity units
- Baths
- Kitchen worktops & sinks
- Shower trays & enclosures
- Wet rooms
Repairs by material
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Baths
We fill the bath before sealing, so the joint is at its widest.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Let steam out after showers
- Reseal when black spots won’t clean off
- Store bottles on a shelf
- Give the seal a regular clean
Good ventilation is the best protection, and dry the joints after bathing so mould struggles to take hold.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
When to call us in Bemerton
Sealant does not last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint moves slightly every time the bath is filled.
Common reasons people in Bemerton contact us include:
- Mould you can’t clean out
- An untidy old seal
- Leaks at the edges
- Missing sealant behind the taps
Before you book anyone
- What happens if the damage is worse than the photos show
- What aftercare is recommended
- What protection goes down before work starts
- Whether a trained technician does the job
Bemerton questions
Do you cover Bemerton?
Yes, we do. Technicians travel to Bemerton from across the region, with no extra charge for travel.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is there any odour?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you reseal over the old silicone?
All the old sealant comes out. New silicone won’t bond to old.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
Are there extra charges for Bemerton?
There is no separate call-out charge. The fixed price covers the visit and the work.
Towns and villages near Bemerton
More services for Bemerton
Covering Bemerton
Bemerton is about 1 mile west of Salisbury, in Wiltshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in 425 places across Wiltshire, from the larger towns to small villages. You can also see our page for London, about 80 miles away.
Our visits in SP2, SP5 and SP1 work the same way as everywhere else we cover. You will find streets such as Gas Lane, Watt Road and York Road. We also cover the places around Bemerton: Stratford sub Castle (1 mile north-east), Netherhampton (1 mile south-west), Quidhampton (1 mile west), Fugglestone St Peter (2 miles west) and Wilton (2 miles west). Within a short drive, we also cover Amesbury (7 miles north), Old Sarum (3 miles north-east), Bulford (9 miles north), Tisbury (12 miles west), Durrington (9 miles north) and Downton (6 miles south-east).
Around Bemerton
Typical jobs here are in homes near Chafyn Grove School, Church of St Andrew and Salisbury, among other places. You’ll also find Horse & Groom pub (within half a mile east), South Wiltshire UTC (less than half a mile north-east) and Corn Exchange (0.9 miles east). Bemerton has its own railway station: Salisbury station. Nearby you’ll also find Salisbury (0.9 miles south-east) and Old Sarum Castle (1.4 miles north). Open spaces near Bemerton include Harnham Hill.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which usually takes about two hours for a bath. If anything looks different from your photos, we’ll talk to you before going ahead.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Move bottles, mats and clutter away from the area
- Tell us about parking, stairs or access
- Ensure the room can be ventilated
Getting a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We’ll say straight away whether it can be repaired.
Related advice
Why it’s worth resealing in Bemerton
Compared with repairing water damage, resealing is cheap. It’s quick, tidy and protects your home. Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- CHAS and Constructionline accredited
- Fixed prices from your pictures
- No extra charge for your area
- Nothing taken out or refitted
Read our full price list.
Can I fix it myself?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Landlords, letting agents and housing providers in Bemerton use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
