Wiltshire · England
Bath re-enamelling & resurfacing in Bemerton, Wiltshire
Our technicians come to Bemerton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Worn patches where water runs and sits
Bath re-enamelling in Bemerton, done in place
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Common call-outs are for staining under the taps and around the waste and a coloured bath you want in white, across pressed steel baths, cast iron baths and basins & shower trays.
You get a one-year guarantee, the same in Bemerton as everywhere else we work.
- Location
- Bemerton (SP2, SP5, SP1)
- County
- Wiltshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why Bemerton clients choose us
- One-year guarantee on every repair
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
Read our prices page and guide to resurfacing and replacement costs.
Common questions in Bemerton
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We will confirm timings when we quote.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Covering Bemerton
Bemerton is about 1 mile west of Salisbury, in Wiltshire. We travel to clients in Bemerton and the surrounding area, so you do not need to take anything anywhere. We work in 425 places across Wiltshire. We work right across the region, from Bemerton to London (80 miles away).
Jobs in SP2, SP5 and SP1 are booked in the same way as anywhere else. Whether you live on Gas Lane, Watt Road and York Road or a nearby road, we can come to you. Neighbouring places we cover include Stratford sub Castle (1 mile north-east), Netherhampton (1 mile south-west), Quidhampton (1 mile west), Fugglestone St Peter (2 miles west) and Wilton (2 miles west). Within a short drive, we also cover Amesbury (7 miles north), Old Sarum (3 miles north-east), Bulford (9 miles north), Tisbury (12 miles west), Durrington (9 miles north) and Downton (6 miles south-east).
What’s near Bemerton
Typical jobs here are in homes near Chafyn Grove School, Church of St Andrew and Salisbury and the streets around them. Also close by are Horse & Groom pub (under half a mile east), South Wiltshire UTC (under half a mile north-east) and Corn Exchange (0.9 miles east). Bemerton has its own railway station: Salisbury station. Further afield, we also cover the area around Salisbury (0.9 miles south-east) and Old Sarum Castle (1.4 miles north). The countryside around Bemerton includes Harnham Hill.
Prices and what affects them
Resurfacing from £350. We charge the same across the UK, including Bemerton. What changes the price is:
- Access to the area
- The material and finish
- Doing more than one item at once
- How many areas need work
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send pictures for a quote
You can take the photos on your phone. Just make sure we can see:
- A close-up of the damage, in focus
- Details of any past repairs
- Where you are, by postcode
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Common problems we fix in Bemerton
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is generally perfectly sound.
Look out for these signs:
- Worn patches where water runs and sits
- A roll-top that’s seen better days
- Enamel that’s lost its shine and feels rough
- A coloured bath you want in white
Comparing quotes
- The length of the guarantee and what it covers
- Whether the price covers travel
- When it can be used again
- Whether a trained technician does the job
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
How the visit works
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes most of the day for most jobs. The room is left tidy and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
- Keep children and pets away from the room on the day
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Advice
Landlords, agents and businesses in Bemerton
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Bemerton as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
What a repair can’t fix
We won’t take on work that won’t last, so these are the limits:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- A metal bath with a through crack
Send us photos and we’ll tell you honestly.
Materials we work on in Bemerton
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Towns and villages near Bemerton
Also in Bemerton
About our accreditations · Every repair comes with a one-year guarantee.
