Kent · England
Bath & shower resealing (mastic) in Breach, Kent
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Breach and across Kent. Free, fixed quotes from your photos.
- Discoloured, yellow sealant
- Leaks at the edges
- Gaps by the taps
Bath resealing at your home in Breach
All of the old sealant is cut out, treat any mould, and apply fresh mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. Our technicians work on wet rooms, baths and shower trays & enclosures, and the jobs we see most are mould you can’t clean out and silicone coming away from the tiles.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Area
- Breach (ME9)
- Area hub
- Kent
- Warranty
- A year, on every repair
- Price
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
We will not take on work that will not last, so these are the limits:
- Gaps too big for silicone alone
- Water damage behind the bath that needs a builder
- Hollow or loose tiles
Send us photos and we will tell you honestly.
What we work on
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
- Shower trays & enclosures
- Baths
What bath resealing costs
We price every job individually. The main factors are:
- How easy the damage is to reach
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- Unusual colours or finishes
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- Any earlier repairs or coatings
- A wider photo showing the whole bath or shower
- Natural light rather than flash
- A coin or ruler next to the damage for scale
To get a price, send two or three photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Materials and what they mean for the repair
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
The process
Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. It normally takes a couple of hours, and we’ll tell you if anything changes.
- All the old sealant is cut out and removed.
- We clean the joint and treat any mould.
- The joint is dried thoroughly.
- We fill a bath with water before sealing so the gap is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
Before we arrive
- Tell us about parking, stairs or access
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
How to get a price
If you are in Breach and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
Common questions in Breach
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
What happens after I send pictures?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
When can I use the bath after resealing?
Normally about a day later. We confirm before we leave.
How long does a reseal take?
Around two hours for a bath, plus curing time.
Do you seal over the old sealant?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
Can you quote from photos?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Breach and the surrounding area
Breach is about 3 miles east of Gillingham, in Kent. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. We cover 922 places across Kent. You can also see our page for London, about 34 miles away.
Postcode districts we cover here: ME9. Other places close to Breach include Newington (1 mile south-east), Lower Hartlip (1 mile south-west), Lower Halstow (1 mile north-east), Upchurch (1 mile north) and Moor Street (1 mile west). Larger places within reach include Maidstone (9 miles south-west), Sittingbourne (4 miles east), Gravesend (13 miles west), Faversham (11 miles east), Northfleet (14 miles west) and Minster (8 miles north-east).
What’s near Breach
We visit homes around Church of St Mary, The Wheatsheaf pub and Leigh Academy Rainham. Nearby too are Newington Church of England Primary School (0.7 miles south-east) and Berengrave Chalk Pit (1.9 miles north-west). Breach’s nearest station is Newington station, roughly 0.8 miles south-east. A little further out are Court Hall Museum (3.5 miles east) and Medway Maritime Hospital (5 miles west). The countryside around Breach includes Bishop Saltings.
Towns and villages near Breach
Other services in Breach
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Landlord and trade work in Breach
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Do you need bath resealing in Breach?
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning only removes the surface.
Send us a picture if you notice any of these:
- Gaps in the seal
- Water getting behind the bath or tray
- Black spots in the silicone
- An untidy old seal
Questions to ask before you book
- Whether the price is fixed and includes VAT
- If travel is included in the price
- How your room will be protected
- When it can be used again
Why reseal now?
Putting new silicone over old does not last. It soon peels, and mould stays trapped behind it. We remove the old sealant completely. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why Breach customers choose us
- Straight answers about what a repair can do
- Usually one visit, start to finish
- Everything repaired in place
- Repair technicians who travel to you, UK-wide
Take a look at our pricing.
About our accreditations · Every repair comes with a one-year guarantee.
