Lincolnshire · England

Bath & shower resealing (mastic) in Bretton, Lincolnshire

Bath resealing in and around Bretton: photo quotes, tidy work and a year’s guarantee.

  • Water getting behind the bath or tray
  • Gaps in the seal
  • Unsealed corners
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing for Bretton homes

Common problems we fix in Bretton

No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould loves, and the joint flexes each time the bath fills.

The most common problems we’re called about are:

  • Leaks at the edges
  • Stained silicone
  • Sealant that’s split or lifting
  • Mould you can’t clean out

Comparing quotes

  • How the colour is matched
  • The length of the guarantee and what it covers
  • How long it needs to cure
  • Whether the price covers travel

10 questions to ask before you book

About our bath resealing in Bretton

The key to a good reseal is getting all of the old silicone out. Fresh sealant does not stick to old, which is why so many DIY reseals peel. If you’re dealing with water getting behind the bath or tray and mould you can’t clean out, we can help, on baths, shower trays & enclosures and basins & vanity units alike.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.

Location
Bretton (PE3, PE4, PE1)
Area hub
Lincolnshire
Guarantee
A year, on every repair
Quote
Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Bretton questions

My seal keeps tearing. Why?

The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.

What does bath resealing cost?

Because every job differs, we price from pictures. You know the full cost before anything is booked.

Can you quote from photos?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

How soon can you come?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Materials and what they mean for the repair

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

Prices and what affects them

There are no hourly rates or hidden extras. The price is based on:

  • What kind of damage it is
  • How many items we do on one visit
  • The material
  • How many areas need work

A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

Send photos for a quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • Where you are, by postcode
  • A clear, close picture of the problem area
  • One picture of the whole bath or shower
  • Daylight if possible, and no flash reflection

To get a price, send two or three photos using our quote form or call us. We will say right away whether it can be repaired.

Why it’s worth resealing in Bretton

Resealing is routine maintenance. Putting off a reseal lets water get behind the bath or tray, and that damage costs much more to fix. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.

Why book with us

  • No need to remove anything
  • A fixed quote before booking
  • Honest advice, even when it means no job
  • Work done at your home or business

Take a look at our pricing.

Work for landlords and builders

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

How it works

Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes around two hours in most cases. We leave the room clean.

  1. The old silicone is cut out completely.
  2. We remove the residue and clean the joint.
  3. We treat mould and dry the joint thoroughly.
  4. We fill the bath, or weight the tray, to open the joint.
  5. We apply fresh mould-resistant silicone and tool a neat bead.

Before we arrive

  • Tell us about parking, stairs or access
  • Let us know if it has been repaired before
  • Let us know which floor the room is on

Get a quote

Upload photos of the damage and a wider shot of the whole item, with your PE3 postcode, and we’ll come back with a fixed quote.

Send photos for a quote

Advice

How to look after the repair

After the repair has cured, a few habits help it last:

  • Wipe the joints dry after use
  • Clean the joints with a mild cleaner
  • Air the room after use
  • Use the extractor fan

Avoid scraping the joints, and don’t stand bottles on the seal.

Damp below or loose tiles need checking quickly. There may be more going on, so we will tell you if it needs a builder or plumber.

Bretton and nearby

Bretton is about 2 miles north-west of Peterborough, in Lincolnshire. We travel to clients in Bretton and the surrounding area, so there is no workshop to go to. Bretton is one of 732 towns and villages in Lincolnshire where we work. We work right across the region, from Bretton to Birmingham (68 miles away).

Here we cover the PE3, PE4 and PE1 postcode area. From Sages Lane, Mallard Road and Marholm Road or anywhere nearby, we can come to you. Other places close to Bretton include Westwood (1 mile south-east), New England (1 mile east), Peterborough (2 miles south-east), Longthorpe (2 miles south) and Boroughby (2 miles south-east). We also work in nearby towns such as Spalding (14 miles north), Stamford (9 miles north-west), Bourne (12 miles north), Austerby (12 miles north), Market Deeping (6 miles north) and Crowland (7 miles north-east).

Around Bretton

Our customers here include homes close to Church of the Holy Spirit, The Cock Public House and Grimeshaw Wood. Nearby too are Queen Katharine Academy (0.7 miles north-east), Iqra Academy (within half a mile east) and Lime Academy Watergall (within half a mile north-west). Bretton’s nearest station is Peterborough station, roughly 2.2 miles south-east of the centre. Further afield, we also cover the area around Peterborough Castle (2.5 miles south-east) and Edith Cavell Hospital (0.8 miles south). For a walk, there’s Thorpe Wood and Orton Mere.

Map of Bretton © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.