Suffolk · England
Bath & shower resealing (mastic) in Campsea Ashe, Suffolk
Bath, shower and sink resealing with new mould-resistant silicone in Campsea Ashe, carried out at your home and guaranteed for a year.
- Missing sealant behind the taps
- A messy previous reseal
- Discoloured, yellow sealant
Landlord and trade work in Campsea Ashe
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
About our bath resealing in Campsea Ashe
Resealing is one of the simplest ways to protect your bathroom. Failed sealant lets water get where it shouldn’t, and a new seal stops it. Our technicians work on shower trays & enclosures, basins & vanity units and baths, and common reasons people contact us are old sealant that looks dirty and black mould in the sealant.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Area
- Campsea Ashe (IP13)
- Region
- Suffolk
- Cover
- 12 months on all our work
- Quote
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
A few problems are outside what a surface repair can do:
- Tiles that move, until they’re refixed
- Very wide gaps that need a trim
- Water damage behind the bath that needs a builder
Send us photos and we’ll tell you honestly.
Materials we repair
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
- Baths
How we price bath resealing
Each job gets its own fixed quote. This is what makes a difference:
- How many areas need work
- Unusual colours or finishes
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
We charge the same wherever you are, with no extra for Campsea Ashe. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
We price nearly every job from photos. This is what to send:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- One sharp close-up of the damage
- One picture of the whole bath or shower
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Aftercare tips
How the surface is treated afterwards matters:
- Ventilate the bathroom well
- Don’t stand toiletries on the seal
- Let steam out after showers
- Clean the sealant gently and regularly
Keep the room well ventilated, and dry the joints after bathing so mould struggles to take hold.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Also near Campsea Ashe
Other services in Campsea Ashe
Your questions about bath resealing in Campsea Ashe
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
How long does silicone take to cure?
We will give you the curing time, usually around a day.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Which areas do you work in?
We work UK-wide, and that includes Campsea Ashe. Prices don’t change with location.
Why does my sealant keep splitting?
The bath or tray is probably flexing. Persistent splitting can mean the support needs attention.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Campsea Ashe.
Do you need bath resealing in Campsea Ashe?
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning cannot get it all out.
Typical reasons for a call-out include:
- Mould you cannot clean out
- Old sealant that looks dirty
- Unsealed corners
- Silicone coming away from the tiles
What to look for in a quote
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
- What aftercare is recommended
- How the colour is matched
Repairs by material
Baths
We fill the bath before sealing, so the joint is at its widest.
Sinks and worktops
We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.
Where we work around Campsea Ashe
Campsea Ashe is about 9 miles north-east of Kesgrave, in Suffolk. We travel to customers in Campsea Ashe and the surrounding area, so you don’t need to take anything anywhere. Our repair technicians cover all 731 towns and villages across Suffolk, from the larger towns to small villages. Our nearest city page is London, about 78 miles away.
Here we cover the IP13 postcode area. Jobs here include addresses on Talbot Walk, Abbey Gardens and Mill Lane. We also travel to Ash Corner (1 mile north-west), Lower Hacheston (1 mile north-west), Wickham Market (1 mile west), Pettistree (2 miles west) and Hacheston (2 miles north-west). Within a short drive, we also cover Ipswich (12 miles south-west), Felixstowe (13 miles south), Kesgrave (9 miles south-west), Woodbridge (5 miles south-west), Stoke (13 miles south-west) and Maidenhall Estate (13 miles south-west).
Local landmarks in Campsea Ashe
We visit homes around Church of St John the Baptist and Dog and Duck pub. There is a railway station in Campsea Ashe itself: Wickham Market station. Other landmarks nearby include Parham Hall (2.9 miles north-west) and St Audry's Hospital (3.5 miles south-west). Green spaces nearby include Blaxhall Common.
- Parks and local facilities nearby include Plomesgate Rural District (1.6 miles north-east)
What we do, step by step
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes around two hours. At the end we talk you through the curing time and the aftercare.
- First we strip out every bit of the old mastic.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, taps included.
Preparing for the visit
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
- Keep a parking space free if you can
Get a quote
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
About our accreditations · Every repair comes with a one-year guarantee.
