Suffolk · England

Bath & shower resealing (mastic) in Pettistree, Suffolk

Bath resealing in Pettistree without the cost of replacing. Send us pictures for a fixed price, then we come to you.

  • Damp near the bath
  • Sealant that is split or lifting
  • Mould you cannot clean out
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Pettistree?

Bath resealing in Pettistree, done in place

We cut out all of the old sealant, deal with any mould, and reseal with new mould-resistant silicone. We do this for baths, showers, sinks and worktops, and that includes the awkward spots behind the taps. If you are dealing with discoloured, yellow sealant and unsealed corners, we can usually put it right, on basins & vanity units, wet rooms and baths alike.

Big or small, it’s backed by a one-year guarantee in Pettistree and across Suffolk.

Where
Pettistree (IP13)
Region
Suffolk
Warranty
A year, on every repair
Price
Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

FAQs for Pettistree

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

How do I book?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

Can I add another job to the visit?

Of course, and it normally saves money. Just add the extra items to your photos and we will quote them together.

What happens once I’ve sent photos?

We come back with a fixed quote. You’re under no obligation.

How long does a reseal take?

Most reseals take about two hours. Leave it to cure before use.

What if the damage is worse than the photos show?

The price is fixed for what the photos show. If there’s more, we will tell you before starting.

Is the work guaranteed?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Honest limits

It helps to know what we cannot do too:

  • A flexing bath
  • Gaps too big for silicone alone
  • Hollow or loose tiles

Not sure? Send pictures and we will give you a straight answer before booking.

Materials we work on in Pettistree

  • Shower trays & enclosures
  • Baths
  • Kitchen worktops & sinks
  • Wet rooms
  • Basins & vanity units

What your bath or shower is made of matters

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Baths

Baths are resealed with water in them, to open the joint fully.

What bath resealing costs

You will know the full cost before booking. We take into account:

  • Doing more than one item at once
  • Where the damage is and how we get to it
  • Unusual colours or finishes
  • What the surface is made of

Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Getting a price from pictures

Good photos mean an accurate price. Here’s what we find most useful:

  • Good light, ideally daylight, without flash glare
  • A coin or ruler next to the damage for scale
  • The material, if you know it
  • Where you are, by postcode

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them to us. What comes back is a fixed price, not a guess.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

About Pettistree

Pettistree is about 7 miles north-east of Kesgrave, in Suffolk. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in 731 places in Suffolk. Our nearest city page is London, about 76 miles away.

Here we cover the IP13 postcode area. Local streets include The Street, Grove Road and Thong Hall Road, all of which we cover. Other places close to Pettistree include California (1 mile north-west), Wickham Market (1 mile north-east), Ufford (1 mile south), Lower Hacheston (2 miles north-east) and Dallinghoo (2 miles west). Larger places within reach include Ipswich (11 miles south-west), Felixstowe (12 miles south), Stowmarket (15 miles west), Kesgrave (7 miles south-west), Woodbridge (4 miles south-west) and Stoke (11 miles south-west).

Local landmarks in Pettistree

In Pettistree, that means homes near Church of St Peter and St Paul, The Three Tuns pub and Wickham Market Primary School. For rail, the closest station is Wickham Market station, about 2 miles east of the centre. Other landmarks nearby include Easton Farm Park (2.5 miles north-west) and Parham Hall (3.2 miles north). Not far away are Foxburrow Farm.

Map of Pettistree © OpenStreetMap contributors

Keeping it looking good

How the surface is treated afterwards matters. Here’s what we suggest:

  • Wipe the joints dry after use
  • Air the room after use
  • Run the extractor fan during and after showers
  • Clean the sealant gently and regularly

Do not scrape the sealant with anything sharp, and don’t stand bottles on the seal.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.

What we’re called out for in Pettistree

Most reseals are because of black mould. It grows into the sealant itself, so cleaning can’t get it all out.

The most common problems we are called about are:

  • A messy previous reseal
  • Old sealant that looks dirty
  • Water getting behind the bath or tray
  • Black mould in the sealant

Questions to ask before booking

  • Who turns up on the day
  • Whether the price covers travel
  • The length of the guarantee and what it covers
  • What protection goes down before work starts

Our hiring checklist

Landlords, agents and businesses in Pettistree

We are used to working with agents and managing companies. Just send pictures, the address and how to get access.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.

What we do, step by step

Arrival times are agreed in advance. Once we’re there, the work takes about two hours for a bath for most jobs. We leave the room clean and ready to use once it has cured.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. We ensure the joint is completely dry.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Move bottles, mats and clutter away from the area
  • Avoid using the area for a few hours before we arrive

Get a quote

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a fixed quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.