Isle of Wight · England

Bath Resealing for Colwell homes

Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Colwell. Send photos for a free, fixed quote.

  • Black spots in the silicone
  • Gaps in the seal
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing near Colwell

Do you need bath resealing in Colwell?

Sealant doesn’t last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint moves slightly every time the bath is filled.

Common reasons people in Colwell contact us are:

  • Silicone smeared on tiles
  • Gaps in the seal
  • Leaks at the edges
  • Mould you can’t clean out

Questions to ask before you book

  • What the guarantee covers, and for how long
  • Who will actually do the work
  • Whether they match the colour on site
  • What happens if they find more damage

Our hiring checklist

How we handle bath resealing in Colwell

We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. If you are dealing with gaps by the taps and stained silicone, we can normally put it right, on baths, kitchen worktops & sinks and shower trays & enclosures alike.

Every repair is covered by a one-year guarantee, wherever you are in Isle of Wight.

Technician in a mask working on a freestanding roll-top bath
Area
Colwell (PO40, PO39)
County
Isle of Wight
Cover
One year on every repair
Quotes
Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

What we do, step by step

There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. Most visits take around two hours, including clearing up.

  1. The surrounding area is protected and the joints masked.
  2. We remove the old sealant and every trace of residue.
  3. The joint is cleaned, treated and dried.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Make sure the room can be ventilated
  • Avoid using the area for a few hours before we arrive

Get a quote

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Get a fixed price

Related advice

Covering Colwell

Colwell is about 5 miles south of Lymington, in Isle of Wight. Jobs in Colwell are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We work in all 125 towns and villages in Isle of Wight.

Jobs in PO40 and PO39 work the same way as everywhere else we cover. Jobs here include addresses on Colwell Chine Road, Heath Lane and Chine Close and the roads around them. Other places close to Colwell include Totland (1 mile south-west), Freshwater (1 mile south-east), Norton Green (1 mile north-east), Easton (1 mile south-east) and Afton (1 mile south-east). Within a short drive, we also cover Newport (10 miles east), Cowes (11 miles north-east), East Cowes (12 miles north-east), Barton (11 miles east), Hunny Hill (10 miles east) and Cross Lane (11 miles east). Some remote addresses need extra planning, so call us to arrange it.

What’s near Colwell

Typical jobs here are in homes near All Saints Church of England Primary School, Christ Church and Colwell Bay Inn, among other places. Colwell’s nearest station is Lymington Pier station, roughly 4.9 miles north. A little further out are Yarmouth Castle (2 miles north-east) and Medina (within half a mile south-west). The countryside around Colwell includes Tennyson Down and Lymington and Keyhaven Marshes Nature Reserve.

Map of Colwell © OpenStreetMap contributors

Keeping it looking good

Good habits make a big difference to how long a repair lasts:

  • Ventilate the bathroom well
  • Do not stand toiletries on the seal
  • Air the room after use
  • Reseal when black spots will not clean off

Good ventilation is the best protection, and dry the joints after bathing to keep mould away.

Damp below or loose tiles need checking quickly. There may be more going on, and we will say if you need a builder or plumber.

How we price bath resealing

We don’t charge extra for travel to Colwell. The price depends on:

  • Unusual colours or finishes
  • Whether it’s a chip, crack, burn or wear
  • How much damage there is
  • Whether we combine several jobs

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Getting a price from pictures

We price nearly every job from pictures. This is what we need:

  • Natural light rather than flash
  • A close-up of the damage, in focus
  • Details of any past repairs
  • Your postcode, so we can check dates

For a price in Colwell, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Landlord and trade work in Colwell

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

For anyone letting property in or around Colwell, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.

Colwell questions

How do I stop mould in sealant?

Generally poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.

Do you cover Colwell?

Yes. We cover the whole UK and travel to Colwell. Send us pictures for a fixed quote, or call 0345 017 0787.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Colwell.

Do you seal over the old sealant?

We always remove the old sealant completely. Fresh silicone does not stick to old.

Is there a guarantee?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

How long does a reseal take?

Around two hours for a bath, then it needs to cure.

How long before I can shower?

Normally about a day later. We will tell you the exact time.

Will the price change on the day?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

What your bath or shower is made of matters

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

What we cannot put right

It helps to know what we cannot do:

  • A bath or tray that moves, until its support is fixed
  • Hollow or loose tiles
  • Very wide gaps that need a trim

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Kitchen worktops & sinks
  • Wet rooms
  • Baths
  • Shower trays & enclosures
  • Basins & vanity units

Is resealing worth it?

Resealing costs very little and protects the walls and floor. Failed sealant can lead to water damage that is much more expensive. Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

What you get with us

  • Honest advice, even when it means no job
  • Usually one visit, start to finish
  • No extra charge for your area
  • Nothing taken out or refitted

Read our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.