Isle of Wight · England
Bath Resealing in Freshwater
Bath resealing for Freshwater, without a refit. Send us photos for a fixed price, then book a visit.
- Gaps by the taps
- Sealant that’s split or lifting
- Water getting behind the bath or tray
Why reseal now?
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.
Why Freshwater clients choose us
- Everything repaired in place
- One visit for most repairs
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
See our full price list.
Bath resealing in Freshwater, done in place
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, as one neat, continuous bead. If you are dealing with gaps in the seal and water getting behind the bath or tray, we can normally put it right, on kitchen worktops & sinks, wet rooms and shower trays & enclosures alike.
Big or small, you get the same one-year guarantee in Freshwater and across Isle of Wight.
- Where
- Freshwater (PO40)
- Region
- Isle of Wight
- Cover
- A year, on every repair
- Quote
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Freshwater and the surrounding area
Freshwater is about 5 miles south of Lymington, in Isle of Wight. We visit clients in Freshwater, so you do not need to take anything anywhere. Our repair technicians cover all 125 towns and villages across Isle of Wight, from the larger towns to small villages.
We cover every part of PO40 and the streets around it. Local streets include Dall Square, High Street and The Square, all of which we cover. We also cover the places around Freshwater: Easton (1 mile south-east), Colwell (1 mile north-west), Norton Green (1 mile north), Afton (1 mile south-east) and Totland (1 mile west). Larger places within reach include Newport (10 miles east), Cowes (11 miles north-east), Shanklin (15 miles east), Ventnor (15 miles south-east), East Cowes (12 miles north-east) and Barton (10 miles east). For island and remote addresses, call first so we can plan the visit.
Near you in Freshwater
Typical jobs here are in homes near The Red Lion pub, All Saints' Church and All Saints Church of England Primary School and the streets around them. Nearby you’ll also find Yarmouth Castle (1.9 miles north-east) and Ferguson Family Museum (0.7 miles north-east). The countryside around Freshwater includes Lymington and Keyhaven Marshes Nature Reserve and Afton Down.
- Local facilities include Medina (0.8 miles west)
Also near Freshwater
Other services in Freshwater
Do you need bath resealing in Freshwater?
Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.
These are the problems we’re asked about most:
- A messy previous reseal
- Missing sealant behind the taps
- Gaps in the seal
- Black spots in the silicone
What your quote should include
- Whether there are any call-out or travel charges
- How to look after the finish
- How your room will be protected
- A fixed price, and whether VAT is included
What we do, step by step
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. Most visits take around two hours.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- The joint is cleaned, treated and dried.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
Before we arrive
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
- Let the surface dry out before the visit
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
What affects the price in Freshwater
Quotes are free and the price is fixed. What we look at:
- How much damage there is
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed price
Almost every job we do is priced from pictures. This is what we need:
- One picture of the entire bath or shower
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Your questions about bath resealing in Freshwater
Do you seal over the old sealant?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
Do you come to Freshwater?
Yes, we do. Technicians travel to Freshwater from across the region, and the price is the same as everywhere else.
What areas do you cover?
All of Isle of Wight, and the rest of the UK. Travel is included in the price.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Why does my sealant keep going mouldy?
Usually poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
When a repair isn’t the answer
In fairness, there are a few things a repair will not fix:
- Hollow or loose tiles
- Water damage behind the bath that needs a builder
- Very wide gaps that need a trim
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Wet rooms
- Shower trays & enclosures
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
Looking after it afterwards
So the finish stays in good condition for years:
- Replace the seal when mould sets in
- Keep bottles off the joints
- Give the seal a regular clean
- Air the room after use
Good ventilation is the best protection, and wipe the joints after use so mould struggles to take hold.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
Landlord and trade work in Freshwater
If you manage property in Freshwater, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
About our accreditations · Every repair comes with a one-year guarantee.
