Moray · Scotland
Bath Resealing in Cullen
Bath resealing in and around Cullen: photo quotes, tidy work and a year’s guarantee.
- Old sealant that looks dirty
- Damp near the bath
- A messy previous reseal
How we handle bath resealing in Cullen
Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, as one neat, continuous bead. Whether it’s black mould in the sealant and leaks at the edges, we can normally put it right.
Every repair is covered by our one-year guarantee, wherever you are in Moray.
- Location
- Cullen (AB56)
- Region
- Moray
- Cover
- A year, on every repair
- Price
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Cullen
Even good sealant eventually discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.
You may need us if you’ve spotted any of these:
- Silicone smeared on tiles
- Gaps by the taps
- Mould you can’t clean out
- Damp near the bath
Comparing quotes
- What happens if they find more damage
- Whether they match the colour on site
- Is the price fixed, and does it include VAT?
- When it can be used again
More services for Cullen
Honest limits
We would rather lose a job than do one that will not last, so these are the limits:
- Gaps so wide they need filling or trims before sealing
- A bath or tray that moves, until its support is fixed
- Hollow or loose tiles
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Basins & vanity units
- Kitchen worktops & sinks
- Wet rooms
- Shower trays & enclosures
- Baths
Landlords, agents and businesses in Cullen
Landlords, letting agents and housing providers in Cullen use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
What bath resealing costs
You will not pay by the hour. The price is based on:
- The material
- Where the damage is and how we get to it
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
We charge the same wherever you are, so there is no premium for Cullen. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- Any earlier repairs or coatings
- What it’s made of, if you know
- A wider photo showing the entire bath or shower
- Daylight if possible, and no flash reflection
Upload pictures of the damage and one of the whole item, and tell us you’re in Cullen, and we’ll reply with a fixed quote.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Where we work around Cullen
Cullen is about 6 miles east of Buckie, in Moray. Clients in Cullen get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Cullen is one of 58 places in Moray where we work.
Here we cover the AB56 postcode area. From The Square, Station Road and Old Church Road or anywhere nearby, a technician can come to you. Main roads around Cullen include the A98, which makes travel easy. We also travel to Lintmill (1 mile south), Portknockie (2 miles north-west), Sandend (3 miles east), Buckpool (3 miles west) and Findochty (3 miles west). Further out, we also cover Buckie (6 miles west), Keith (11 miles south-west), Fochabers (12 miles south-west), Ianstown (5 miles west), Lhanbryde (15 miles west) and Portessie (5 miles west). Being one of Moray’s larger places, Cullen is somewhere we visit frequently. Some remote addresses need extra planning, so it’s best to call first.
What’s near Cullen
We visit homes around Auction House, among other places. A little further out are Fordyce Joiner's Workshop (3.4 miles south-east) and castle 30m NNW of Inaltry (2.5 miles south). The countryside around Cullen includes Durn Hill.
Your questions about bath resealing in Cullen
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens next?
We review the pictures and send a fixed quote.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What does bath resealing cost?
We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your AB56 postcode.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Why it’s worth resealing in Cullen
Sealing over old silicone is a false economy. It soon peels, and mould stays trapped behind it. We remove the old sealant completely. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Dust sheets down, tidy finish
- Everything repaired in place
- Repair technicians who travel to you, UK-wide
- Most jobs done in one visit
Take a look at our pricing.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Reseal when black spots won’t clean off
- Run the extractor fan during and after showers
- Air the room after use
- Clean the sealant gently and regularly
Keep the room well ventilated, and wipe the joints after use to keep mould away.
Reseal before water gets in. Gaps or lifting edges mean it needs doing.
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and the work begins. It normally takes a couple of hours, and we’ll keep you posted as we go.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
