Hull · England

Bath Resealing for Drypool homes

Bath resealing for Drypool, without a refit. Get a fixed quote from your pictures, then book a visit.

  • An untidy old seal
  • Leaks at the edges
  • Stained silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath resealing in Drypool

Common questions in Drypool

Is repairing better than replacing?

Usually, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

Can you reseal over the old silicone?

Never over old. It’s removed, cleaned off and the joint dried first.

I rent my home. Can I book you?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Why does the silicone keep cracking?

Something is moving. Persistent splitting can mean the support needs attention.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Can you redo someone else’s repair?

Most of the time. Let us know what was used before.

Bath resealing at your home in Drypool

We reseal baths, shower trays, basins and worktops using mould-resistant silicone. A typical reseal takes a couple of hours. We work on wet rooms, baths and shower trays & enclosures, and people most frequently call us about mould you can’t clean out and silicone coming away from the tiles.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Location
Drypool (HU1, HU9, HU2)
Area hub
Hull
Guarantee
One year on every repair
Quote
Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

The process

The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the work takes about two hours for a bath. Before we leave, we explain how soon it can be used and how to look after it.

  1. All the old sealant is cut out and removed.
  2. We clean the joint and treat any mould.
  3. We dry the joint thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Plan for the room to be out of bounds to pets and children
  • Have a window or extractor fan available

Ask for a price

The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say straight away whether it can be repaired.

Send pictures for a quote

Related advice

Repairs by material

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, once the joint is completely dry.

Shower trays

We put weight on a tray before sealing it, for the same reason.

What we’re called out for in Drypool

Sealant doesn’t last forever. Every bath or shower adds moisture and soap residue, which mould loves, and the joint flexes each time the bath fills.

You may need us if you’ve spotted:

  • Stained silicone
  • Gaps in the seal
  • A messy previous reseal
  • Leaks at the edges

Comparing quotes

  • What prep work is covered
  • Whether the colour is mixed to match
  • Whether the price covers travel
  • What aftercare is recommended

10 questions to ask before you book

What we can’t put right

A few problems are outside what a surface repair can do:

  • Loose tiles, which need refixing first
  • A flexing bath
  • Water damage behind the bath that needs a builder

If in doubt, send pictures and we will say what we think.

Materials we work on in Drypool

  • Kitchen worktops & sinks
  • Baths
  • Shower trays & enclosures
  • Basins & vanity units
  • Wet rooms

Keeping it looking good

Good habits make a big difference to how long a repair lasts:

  • Let steam out after showers
  • Keep the joints dry
  • Run the extractor fan during and after showers
  • Store bottles on a shelf

Use the extractor fan, wipe the joints dry after use, and clean them regularly with a mild cleaner to slow mould growth.

Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.

Prices and what affects them

You will not pay by the hour. The price is based on:

  • How hard the colour is to match
  • Where the damage is and how we get to it
  • The material
  • Previous DIY repairs that have to come out

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Getting a price from pictures

Good photos mean an accurate price. Here’s what helps:

  • The material, if you know it
  • One sharp close-up of the damage
  • One picture of the whole bath or shower
  • A coin beside the damage so we can judge size

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

Resealing in Drypool: why it matters

Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.

Why choose Surface Doctor in Drypool

  • We will tell you if it’s not worth repairing
  • Repair technicians who travel to you, UK-wide
  • Everything repaired in place
  • Every repair guaranteed for a year

Read our prices page.

For landlords and businesses

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

We regularly work with letting and managing agents. Send the address, pictures and access details.

Covering Drypool

Drypool is about 1 mile south-east of Kingston upon Hull, in Hull. Across the HU1 area, a technician comes to you. Drypool is one of 22 places in Hull where we work. Our nearest city page is Leeds, about 50 miles away.

Our technicians cover all of HU1, HU9 and HU2 and the streets around it. Jobs here include addresses on Scale Lane, High Street and Chapel Lane. We also cover the places around Drypool: Wilmington (1 mile north), Summergangs (1 mile north-east), Kingston upon Hull (1 mile north-west), Stepney (1 mile north-west) and Stoneferry (2 miles north). Larger places within reach include Sutton-on-Hull (3 miles north), Kingswood (4 miles north), Sutton Ings (3 miles north), Gipsyville (3 miles west), Longhill (3 miles north-east) and Bransholme (3 miles north).

Landmarks near Drypool

In Drypool, that means homes near Victoria Dock Primary School, Ron Dearing UTC and Robbies Public House, among other places. You will also find St Mary's Church (within half a mile west), Ron Dearing UTC (0.6 miles west) and Pearson Park (1.5 miles north-west). Drypool’s nearest station is Hull station, about 0.9 miles west. Other landmarks nearby include Baynard Castle (4.8 miles north-west) and Princes Quay (0.6 miles west).

Map of Drypool © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.