Renfrewshire · Scotland

Bath & shower resealing (mastic) in Ferguslie Park, Renfrewshire

Bath, shower and sink resealing with new mould-resistant silicone for householders, landlords and businesses in Ferguslie Park. Free, fixed quotes from your photos.

  • A messy previous reseal
  • Gaps by the taps
  • Discoloured, yellow sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Bath resealing in Ferguslie Park

Bath resealing in Ferguslie Park without replacing anything

A reseal is a small job that makes a big difference. Fresh joints make the whole room look cleaner, and they keep water out. Common call-outs are for leaks at the edges and gaps in the seal, in kitchen worktops & sinks, baths and shower trays & enclosures.

Whatever the size of the job, it’s backed by a one-year guarantee in Ferguslie Park and across Renfrewshire.

Surface Doctor technician refinishing the outside of a roll-top bath
Where
Ferguslie Park (PA1, PA3, PA2)
Region
Renfrewshire
Cover
A year, on every repair
Quote
Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026

Why it’s worth resealing in Ferguslie Park

Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why us?

  • One visit for most repairs
  • CHAS, Constructionline and SafeContractor accredited
  • We’ll tell you if it’s not worth repairing
  • No need to remove anything

Read our prices page.

When a repair isn’t the answer

Before booking, it’s worth knowing the limits too:

  • Rotten walls or floors behind the bath
  • Very wide gaps that need a trim
  • Hollow or loose tiles

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Kitchen worktops & sinks
  • Basins & vanity units
  • Wet rooms
  • Baths
  • Shower trays & enclosures

Work for landlords and builders

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We are used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.

When to call us in Ferguslie Park

Poor ventilation speeds things up: moisture sits on the joints longer, and mould takes hold.

Clients typically contact us about:

  • Stained silicone
  • Missing sealant behind the taps
  • Water getting behind the bath or tray
  • Silicone smeared on tiles

What to look for in a quote

  • Whether the colour is mixed to match
  • What happens if the damage is worse than the photos show
  • How your room will be protected
  • Is the price fixed, and does it include VAT?

Choosing a repair company

Questions from Ferguslie Park

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.

Is it OK to have pets in the house?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Do you seal over the old sealant?

All the old sealant comes out. New silicone will not bond to old.

How do I book?

A close-up, a wider photo and your postcode. Then we will agree a date.

Can you price it without visiting?

Nearly always. If photos do not show enough, we will ask for another angle.

What happens if you find more damage?

The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.

How do I stop mould in sealant?

Mostly moisture and poor ventilation. We use mould-resistant silicone, and ventilation helps it last.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.

About Ferguslie Park

Ferguslie Park is about 1 mile north-west of Paisley, in Renfrewshire. Whether you are in the middle of Ferguslie Park or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Ferguslie Park is one of 21 places in Renfrewshire where we work. We work right across the region, from Ferguslie Park to Glasgow (7 miles away).

Postcode districts we cover here: PA1, PA3 and PA2. Streets in the area include Candren Road, Killoch Lane and Killoch Road, all of which we cover. With the A737 close by, Ferguslie Park is simple for us to get to. If you are just outside Ferguslie Park, we cover Inkerman (1 mile north-west), Paisley (1 mile south-east), Elderslie (2 miles south-west), Charleston (2 miles south-east) and Glenburn (2 miles south-east). We also work in nearby towns such as Renfrew (3 miles north-east), Johnstone (3 miles south-west), Bishopton (4 miles north-west), Bridge of Weir (5 miles west), Craigends (3 miles west) and Kilbarchan (4 miles west).

What’s near Ferguslie Park

In Ferguslie Park, that means homes near Castlehead High School, Paisley and Gallows Green. The nearest railway station is Paisley St James station, roughly 0.5 miles north-east of the centre. Nearby you’ll also find Riccartsbar Hospital (1.1 miles south-east) and Stanely Castle (1.7 miles south). Not far away are Walls Hill and Walls Loch.

Map of Ferguslie Park © OpenStreetMap contributors

What we do, step by step

We agree an arrival time beforehand. Once we are there, the work takes around two hours in most cases. We leave the room clean.

  1. All the old sealant is cut out and removed.
  2. Next we clean the joint and deal with mould.
  3. We make sure the joint is completely dry.
  4. For a bath, we fill it with water first so the joint is at its widest.
  5. We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.

Before we arrive

  • Have a window or extractor fan available
  • Mention any earlier repairs or resurfacing
  • Tell us about parking, stairs or access

Getting a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.

Get a fixed price

Advice

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

What your bath or shower is made of matters

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Baths

We fill the bath before sealing, so the joint is at its widest.

Looking after it afterwards

A little care keeps the finish looking good. Our advice:

  • Don’t stand toiletries on the seal
  • Let steam out after showers
  • Dry the seal after bathing
  • Replace the seal when mould sets in

Don’t scrape the sealant with anything sharp, and do not stand bottles on the seal.

Black mould in sealant isn’t just unsightly; it shows moisture is getting in. Resealing early keeps water out of the walls and floor.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.