North Yorkshire · England

Bath & shower resealing (mastic) in Fleets, North Yorkshire

Bath resealing for Fleets, without a refit. Get a fixed price from your pictures, then book a visit.

  • Old sealant that looks dirty
  • Damp near the bath
  • Gaps by the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Fleets

Signs you need bath resealing in Fleets

In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all take their toll.

Get in touch if you’ve noticed any of these:

  • Black mould in the sealant
  • An untidy old seal
  • Silicone coming away from the tiles
  • Gaps by the taps

Comparing quotes

  • How long it needs to cure
  • How to look after the finish
  • Who will actually do the work
  • Whether they match the colour on site

How to compare quotes

About our bath resealing in Fleets

All of the old sealant is cut out, deal with any mould, and reseal with new mould-resistant silicone. We reseal baths, showers, sinks and worktops, including the awkward bits behind the taps. We regularly repair shower trays & enclosures, wet rooms and kitchen worktops & sinks, and the jobs we see most are stained silicone and an untidy old seal.

Every repair is covered by our one-year guarantee.

Surface Doctor technician refinishing the outside of a roll-top bath
Area
Fleets (BD23)
Area hub
North Yorkshire
Cover
One year on every repair
Price
Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Fleets and the surrounding area

Fleets is about 6 miles north of Skipton, in North Yorkshire. Whether you are in the middle of Fleets or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Fleets is one of 626 places in North Yorkshire we cover. You can also see our page for Leeds, about 26 miles away.

Our visits in BD23 work the same way as everywhere else we cover. We also cover the places around Fleets: Hetton (1 mile south), Cracoe (1 mile east), Rylstone (1 mile south), Skirethorns (2 miles north-east) and Threshfield (3 miles north-east). Further out, we also cover Skipton (6 miles south), Settle (9 miles west), Pateley Bridge (12 miles east), Grassington (3 miles north-east), Embsay (5 miles south-east) and Gargrave (4 miles south-west).

Near you in Fleets

In Fleets, that means homes near St Peter's Church. The closest station to Fleets is Gargrave station, about 4.7 miles south-west of the centre. Well-known places in the area include Grassington Folk Museum (3.3 miles north-east) and Raikeswood Hospital (5.4 miles south). Open spaces near Fleets include Thorpe Fell Top.

Map of Fleets © OpenStreetMap contributors

When a repair isn’t the answer

A repair isn’t right for every job, including:

  • Hidden water damage
  • A bath or tray that moves, until its support is fixed
  • Tiles that move, until they’re refixed

Not sure? Send pictures and we will give you a straight answer.

Surfaces we repair

  • Basins & vanity units
  • Kitchen worktops & sinks
  • Shower trays & enclosures
  • Wet rooms
  • Baths

Landlord and trade work in Fleets

Landlords, letting agents and housing providers in Fleets use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

Repairs by material

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

Shower trays

Trays are sealed with weight on them, so the joint is at its widest.

What happens on the day

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for about two hours for a bath from start to finish. Before leaving, we tell you how long to leave it and how to look after it.

  1. All the old sealant is cut out and removed.
  2. We clean the joint and treat any mould.
  3. The joint is dried thoroughly.
  4. We fill a bath with water before sealing so the gap is at its widest.
  5. New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.

How to prepare

  • Clear toiletries, mats and anything else from around the area
  • Let the surface dry out before the visit
  • Plan for the room to be out of bounds to pets and children

Get a quote

If you’re in Fleets and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Get a fixed quote

Advice

Prices and what affects them

You won’t pay by the hour. The price depends on:

  • What the surface is made of
  • How hard the colour is to match
  • Any earlier repairs that need removing first
  • Whether it’s a chip, crack, burn or wear

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

How to get a fixed price

When you take your photos, a few simple things make all the difference:

  • What it’s made of, if you know
  • A wider photo showing the entire bath or shower
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you’re under no obligation.

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Looking after it afterwards

Most damage we see is avoidable. A few tips:

  • Keep the joints dry
  • Run the extractor fan during and after showers
  • Do not stand toiletries on the seal
  • Open a window after bathing

Let it cure fully before using the bath or shower, normally about a day.

If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.

Your questions about bath resealing in Fleets

Do you work in Fleets?

Yes. We cover the entire UK and come to Fleets and the rest of North Yorkshire. Send pictures and we will quote, or call 0345 017 0787.

How long does a reseal take?

A bath or shower generally takes a couple of hours. It then needs time to cure.

What areas do you cover?

All of North Yorkshire, and the rest of the UK. There is no extra charge for travel.

What happens next?

We review the pictures and send a fixed quote and the next dates we have.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.

What does bath resealing cost?

Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item with your BD23 postcode.

Can you redo someone else’s repair?

Usually, yes. We remove the old repair before doing a new one, so let us know about it.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.