Cornwall · England
Bath Resealing for Flexbury homes
Bath resealing for Flexbury, without a refit. Get a fixed price from your pictures, then we come to you.
- Silicone smeared on tiles
- Unsealed corners
- Stained silicone
Flexbury: your questions answered
Why does my sealant keep going mouldy?
Usually poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
What happens after I send pictures?
We review the photos and send a fixed quote.
Do you come to Flexbury?
We do. We send a technician to Flexbury for every job, and the price is the same as everywhere else.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Which areas do you work in?
We cover the whole UK, including Flexbury and the rest of Cornwall. Just include your postcode and we’ll offer you dates.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Bath resealing in Flexbury, done in place
Resealing is one of the simplest ways to protect your bathroom. Old, split or mouldy sealant lets water get behind the bath or tray, and resealing puts a stop to that. Typical jobs include gaps in the seal and stained silicone, in kitchen worktops & sinks, basins & vanity units and wet rooms.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Flexbury (EX23)
- County
- Cornwall
- Guarantee
- One year on every repair
- Quotes
- Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Work for landlords and builders
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
If you manage property in Flexbury, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
Is resealing worth it?
Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- Straight answers about what a repair can do
Read our pricing.
When we’d advise against a repair
A repair isn’t right for every job, for example:
- Water damage behind the bath that needs a builder
- A bath or tray that moves, until its support is fixed
- Very wide gaps that need a trim
Send us photos and we will tell you honestly before you book.
What we work on
- Baths
- Shower trays & enclosures
- Wet rooms
- Basins & vanity units
- Kitchen worktops & sinks
Prices and what affects them
Every quote is fixed and free. What we look at:
- The material
- Unusual colours or finishes
- The size and number of damaged areas
- Previous DIY repairs that have to come out
Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it.
Getting a price from pictures
When you take your photos, these tips help us give you a firm price:
- One picture of the entire bath or shower
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
To get a price, send a couple of pictures through our quote form or ring us. We’ll say immediately whether it can be repaired.
Also in Flexbury
What happens on the day
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll get on with it. Most visits take around two hours, tidy-up included.
- First we strip out every bit of the old mastic.
- We clean the joint and treat any mould.
- We ensure the joint is completely dry.
- We fill a bath with water before sealing so the gap is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Clear the area around the damage
- Keep children and pets away from the room on the day
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Read more
Covering Flexbury
Flexbury is about 19 miles south-west of Bideford, in Cornwall. Clients in Flexbury get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. We cover all 644 towns and villages across Cornwall.
Postcode districts we cover here: EX23. We regularly work on streets such as Seawell Road, Lansdown Road and Victoria Road. We also travel to Bude (1 mile south), Maer (1 mile north-west), Poughill (1 mile north-east), Stratton (1 mile east) and Lynstone (1 mile south). Larger places within reach include Newport (15 miles south-east), St Stephens by Launceston (15 miles south-east), Boscastle (12 miles south-west), Kilkhampton (4 miles north-east) and Tintagel (15 miles south-west).
Around Flexbury
Our clients here include homes close to Bude Primary Academy - Infants, Budehaven Community School and St Michael and All Angels Church, among other places. Other landmarks nearby include Penstowe Castle (3.4 miles north-east) and The Castle Heritage Centre (0.5 miles south-west). For a walk, there is Maer Lake.
Aftercare tips
Simple care helps the repair last. We recommend:
- Air the room after use
- Reseal when black spots will not clean off
- Don’t stand toiletries on the seal
- Use the extractor fan
Good ventilation is the best protection, and wipe the joints after use.
Damp below or loose tiles need checking quickly. There may be more going on, and we’ll say if you need a builder or plumber.
When to call us in Flexbury
A bathroom without good ventilation is hard on sealant: moisture sits on the joints longer, and mould takes hold.
These are the problems we’re asked about most:
- Silicone coming away from the tiles
- Mould you cannot clean out
- Missing sealant behind the taps
- Old sealant that looks dirty
Comparing quotes
- Whether there are any call-out or travel charges
- How the room is protected while they work
- When it can be used again
- Whether the price is fixed and includes VAT
About our accreditations · Every repair comes with a one-year guarantee.
