Oxfordshire · England

Bath Resealing for Freeland homes

Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Freeland and across Oxfordshire. Free, fixed quotes from your pictures.

  • An untidy old seal
  • Unsealed corners
  • Black spots in the silicone
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Freeland?

The process

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a couple of hours. We tidy up before we leave and let you know when you can use it again.

  1. We protect the area and mask the joint lines.
  2. We remove the old sealant and every trace of residue.
  3. We clean, treat and dry the joint.
  4. We run a continuous bead of new silicone.
  5. We smooth the bead, remove the tape and leave it to cure.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Mention any earlier repairs or resurfacing
  • Let us know about parking or access

Get a quote

The quickest way to a price is to send two or three pictures using our quote form or ring us. We will say immediately whether it can be repaired.

Get a fixed quote

Advice

About our bath resealing in Freeland

Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. If you are dealing with unsealed corners and old sealant that looks dirty, we can help, on wet rooms, kitchen worktops & sinks and baths alike.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.

Roll-top bath being refinished by a Surface Doctor technician
Where
Freeland (OX29)
County
Oxfordshire
Guarantee
12 months on all our work
Quotes
Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026

Prices and what affects them

Every quote is fixed and free. What we look at:

  • The type of damage
  • How many items we do on one visit
  • Previous DIY repairs that have to come out
  • How many areas need work

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send photos for a quote

When you take your pictures, a few simple things make all the difference:

  • The postcode, so we can plan the visit
  • Natural light rather than flash
  • The material, if you know it
  • Whether it’s been repaired or coated before

Upload a picture of the damage and one of the entire item, and tell us you are in Freeland, and we’ll reply with a fixed quote.

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

FAQs for Freeland

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Do you cover Freeland?

Yes, we do. Technicians travel to Freeland from across the region, and the price is the same as everywhere else.

What happens after I send photos?

We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.

How long does a reseal take?

Usually a couple of hours, then it needs to cure.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How soon can you come?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Is my repair covered?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

My seal keeps tearing. Why?

Typically because the bath or tray moves, or it was sealed with the bath empty. We seal baths full of water.

Repairs by material

Sinks and worktops

Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.

Baths

We fill the bath before sealing, so the joint is at its widest.

Freeland and nearby

Freeland is about 4 miles north-east of Witney, in Oxfordshire. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Freeland is one of 443 towns and villages in Oxfordshire where we work. Our jobs stretch from Freeland to Birmingham (50 miles away).

All of OX29 is covered. Jobs here include addresses on Hurst Lane, Nash Lane and Wroslyn Road. If you are just outside Freeland, we cover East End (1 mile north-west), North Leigh (2 miles west), Combe (2 miles north), New Yatt (2 miles west) and Stonesfield (3 miles north). Within a short drive, we also cover Oxford (9 miles south-east), Bicester (12 miles north-east), Abingdon-on-Thames (11 miles south-east), Witney (4 miles south-west), Carterton (9 miles west) and Wantage (15 miles south).

Local landmarks in Freeland

Locally, our jobs take us to homes close to The Oxfordshire Yeoman pub, Bartholomew School and Church of St Mary and the streets around them. Freeland’s nearest station is Combe station, about 1.3 miles north. Further afield, we also cover the area around Morris Motors Museum (1.5 miles north-east). Not far away are Blenheim Farm.

Map of Freeland © OpenStreetMap contributors

Looking after it afterwards

Simple care helps the repair last. We recommend:

  • Keep bottles off the joints
  • Use the extractor fan
  • Reseal when black spots will not clean off
  • Clean the sealant gently and regularly

Let it cure fully before using the bath or shower, normally about a day.

Black mould in sealant is not just unsightly. Resealing early keeps water out of the walls and floor.

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

If you manage property in Freeland, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.

What a repair cannot fix

Honesty matters more than a booking, so here’s what a repair will not do:

  • Very wide gaps that need a trim
  • Loose tiles, which need refixing first
  • A bath or tray that moves, until its support is fixed

Not sure? Send pictures and we’ll give you a straight answer.

Surfaces we repair

  • Shower trays & enclosures
  • Baths
  • Wet rooms
  • Basins & vanity units
  • Kitchen worktops & sinks

Do you need bath resealing in Freeland?

No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould loves, and the joint moves slightly every time the bath is filled.

You may need us if you’ve spotted any of these:

  • Water getting behind the bath or tray
  • Mould you can’t clean out
  • Silicone coming away from the tiles
  • Gaps by the taps

Before you book anyone

  • Who will actually do the work
  • What protection goes down before work starts
  • Whether the price is fixed and includes VAT
  • Whether they match the colour on site

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.