Conwy · Wales
Bath Resealing in Gyffin
Bath resealing for Gyffin, without a refit. Send us photos for a fixed price, then we come to you.
- Mould you cannot clean out
- Old sealant that looks dirty
- Silicone smeared on tiles
Bath resealing in Gyffin, done in place
Resealing is quick, but it transforms the look. Fresh joints make the whole room look cleaner, and they keep water out. Whether it’s old sealant that looks dirty and gaps in the seal, we can help, on baths, kitchen worktops & sinks and shower trays & enclosures alike.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Gyffin (LL32, LL30)
- County
- Conwy
- Guarantee
- One year on every repair
- Quotes
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair isn’t the answer
Before you book, it’s worth knowing the limits too:
- Very wide gaps that need a trim
- Tiles that move, until they’re refixed
- Water damage behind the bath that needs a builder
Send us photos and we’ll tell you honestly.
Materials we repair
- Wet rooms
- Kitchen worktops & sinks
- Shower trays & enclosures
- Baths
- Basins & vanity units
When to call us in Gyffin
Sealant splits when the bath or tray moves, often because it was sealed with the bath empty.
Clients usually contact us about:
- Missing sealant behind the taps
- Leaks at the edges
- Gaps in the seal
- Mould you cannot clean out
Comparing quotes
- Whether the colour is mixed to match
- What protection goes down before work starts
- The length of the guarantee and what it covers
- When it can be used again
Is resealing worth it?
Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why Gyffin clients choose us
- Every repair guaranteed for a year
- Typically one visit, start to finish
- Rooms protected and left tidy
- Work done at your home or business
See our prices page.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Use the extractor fan
- Dry the seal after bathing
- Replace the seal when mould sets in
- Let steam out after showers
Keep the room well ventilated, and wipe the joints after use to keep mould away.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, so we will tell you if it needs a builder or plumber.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Towns and villages near Gyffin
Also in Gyffin
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Gyffin and nearby
Gyffin is about 3 miles south of Llandudno, in Conwy. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover all 75 towns and villages across Conwy, from the larger towns to small villages. You can also see our page for Liverpool, about 39 miles away.
Every address in LL32 and LL30 is covered. From Old Road, Pool Lane and Hendre Road or anywhere nearby, a technician can come to you. Other places close to Gyffin include Hendre (1 mile south-west), Cadnant Park (1 mile north), Conwy (1 mile north-east), Groesffordd (1 mile south-west) and Tywyn (1 mile north-east). Larger places within reach include Bae Colwyn (4 miles east), Llandudno (3 miles north), Old Colwyn (5 miles east), Colwyn Bay (6 miles east), Abergele (10 miles east) and Colwyn Bay (4 miles east).
Around Gyffin
In Gyffin, that means homes near Ysgol Aberconwy, Ysgol Aberconwy and St Benedict's Church and the streets around them. Gyffin has its own railway station: Conwy station. Further afield, we also cover the area around Conwy Castle (0.5 miles north-east) and Marl (1.4 miles north-east). For a walk, there’s Llyn Pen Ffridd Newydd and Iolyn Park.
Gyffin: your questions answered
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Why does my sealant keep going mouldy?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Is a repair better than a new one?
Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Will the price change on the day?
Your quote covers the damage in the pictures. If there’s more, we will tell you before starting.
How do I get a price for bath resealing in Gyffin?
Every job gets a fixed price based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
How long will it take?
A bath or shower generally takes a couple of hours. It then needs time to cure.
What your bath or shower is made of matters
Baths
Baths are resealed with water in them, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes around two hours. If anything looks different from your photos, we will talk to you before going ahead.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- We make sure the joint is completely dry.
- Baths are filled with water first, so the joint is at its widest.
- We apply new mould-resistant silicone and tool it to a neat finish, including around the taps.
Before we arrive
- Tell us about any previous repairs or coatings
- Let the surface dry out before the visit
- Open a window if you can
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, add your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
