Hampshire · England

Bath & shower resealing (mastic) in Harbridge, Hampshire

Bath resealing in Harbridge without the cost of replacing. Send us pictures for a fixed quote, then book a visit.

  • Black spots in the silicone
  • Unsealed corners
  • Leaks at the edges
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath resealing in Harbridge?

Bath resealing in Harbridge without replacing anything

Baths, trays, basins and kitchen worktops all get resealed. A typical reseal takes a couple of hours. Our technicians work on shower trays & enclosures, wet rooms and basins & vanity units, and people most frequently call us about silicone coming away from the tiles and an untidy old seal.

We stand behind the work with a one-year guarantee, so you are covered after the visit.

Location
Harbridge (BH24)
Area hub
Hampshire
Warranty
12 months on all our work
Quote
Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Do you need bath resealing in Harbridge?

In time, even good sealant discolours particularly in a well-used bathroom. Steam, soap and movement all wear it down.

People generally call us after spotting something like this:

  • Silicone coming away from the tiles
  • Damp near the bath
  • Silicone smeared on tiles
  • Old sealant that looks dirty

Before booking anyone

  • Whether a trained technician does the job
  • Whether the colour is mixed to match
  • Whether there are any call-out or travel charges
  • What happens if the damage is worse than the photos show

Choosing a repair company

Keeping it looking good

It’s all simple stuff, just a few sensible habits:

  • Keep bottles off the joints
  • Keep the joints dry
  • Give the seal a regular clean
  • Ventilate the bathroom well

Let it cure fully before using the bath or shower, usually around 24 hours.

Reseal before water gets in. Split or lifting sealant is a sign it’s time.

What we do, step by step

Your technician turns up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take around two hours, and the room is left clean and tidy.

  1. We cut out all of the old sealant.
  2. We remove the residue and clean the joint.
  3. Any mould is treated and the joint dried.
  4. The bath is filled with water, or weight put on the tray.
  5. New mould-resistant silicone is applied and tooled neatly.

How to prepare

  • Keep a parking space free if you can
  • Keep pets and children out of the room while we work
  • Ensure the room can be ventilated

Get a quote

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.

Send pictures for a quote

Advice

Common questions in Harbridge

My seal keeps tearing. Why?

Usually because the bath or tray moves, or it was sealed with the bath empty. We seal baths full of water.

Can new silicone go over old?

No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.

How much does bath resealing cost in Harbridge?

Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the entire item with your BH24 postcode.

Is there any odour?

Expect a mild smell while we are working that clears as it cures.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.

What happens after I send photos?

You’ll get a fixed quote back, plus dates. There’s no obligation to book.

How do I stop mould in sealant?

Mostly moisture and poor ventilation. Mould-resistant silicone and good ventilation help.

Is it worth repairing rather than replacing?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Where we work around Harbridge

Harbridge is about 3 miles north of Ringwood, in Hampshire. We visit clients in Harbridge and nearby villages, so nothing has to leave your home. Harbridge is one of 683 places in Hampshire where we work.

Jobs in BH24 work the same way as everywhere else we cover. Jobs here include addresses on Kent Lane and Churchfield Lane and the roads around them. We also cover the places around Harbridge: Ibsley (1 mile south-east), Mockbeggar (1 mile east), Ellingham (1 mile south), South Gorley (1 mile east) and Rockford (2 miles south-east). Larger places within reach include Totton (13 miles east), Lymington (14 miles south-east), Romsey (15 miles north-east), New Milton (11 miles south-east), Ringwood (3 miles south) and Barton on Sea (12 miles south-east).

Landmarks near Harbridge

Our customers here include homes close to Church of All Saints and The Old Beams Inn, among other places. Well-known places in the area include Fordingbridge Doll Museum (2.6 miles north) and St Leonard's Hospital (5.7 miles south-west). Green spaces nearby include Linbrook Lake and Blashford Lakes.

Map of Harbridge © OpenStreetMap contributors

Why reseal now?

Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.

Why choose Surface Doctor in Harbridge

  • Fixed prices from your pictures
  • One visit for most repairs
  • Rooms protected and left tidy
  • Straight answers about what a repair can do

See our pricing.

Repairs by material

Baths

We fill the bath before sealing, so the joint is at its widest.

Sinks and worktops

We reseal basins, vanity tops and kitchen worktops, with the joint fully dried first.

What a repair cannot fix

A repair is not always the answer, and we’ll tell you before we start. We can’t fix:

  • Gaps too big for silicone alone
  • Water damage behind the bath that needs a builder
  • Hollow or loose tiles

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we repair

  • Wet rooms
  • Basins & vanity units
  • Baths
  • Kitchen worktops & sinks
  • Shower trays & enclosures

Should I try a DIY kit first?

A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

How we price bath resealing

We charge the same across the UK, including Harbridge. What changes the price is:

  • Unusual colours or finishes
  • Doing more than one item at once
  • Whether it’s a chip, crack, burn or wear
  • Access to the area

There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your photos

Almost every job we do is priced from pictures. This is what we need:

  • Any earlier repairs or coatings
  • A coin or ruler next to the damage for scale
  • Your postcode, so we can check dates
  • One picture of the entire bath or shower

If you are in Harbridge and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.