Liverpool · England
Bath & shower resealing (mastic) in Holy Land, Liverpool
Bath, shower and sink resealing with new mould-resistant silicone for homes and businesses in Holy Land and across Liverpool. Free, fixed quotes from your pictures.
- Old sealant that looks dirty
- An untidy old seal
- Missing sealant behind the taps
Prices and what affects them
Quotes are free and the price is fixed. What we take into account:
- The material and finish
- Whether we combine several jobs
- Unusual colours or finishes
- Access to the area
Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- A photo taken from further back
- What it’s made of, if you know
- Something in shot to show the size
- Where you are, by postcode
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
About our bath resealing in Holy Land
Preparation is everything in a reseal: every bit of old silicone out, mould treated, the joint clean and dry. Only then does the new sealant go on, in a neat, continuous bead. Whether it’s damp near the bath and mould you can’t clean out, we can help, on wet rooms, basins & vanity units and baths alike.
Every repair comes with our one-year guarantee, wherever you are in Liverpool.
- Location
- Holy Land (L8, L69, L17)
- Region
- Liverpool
- Warranty
- One year on every repair
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Holy Land
Holy Land is about 2 miles south-west of Liverpool, in Liverpool. We travel to customers in Holy Land, so there is no workshop to go to. Our repair technicians cover 52 places across Liverpool.
Postcode districts we cover here: L8, L69 and L17. Streets in the area include Park Road, Dingle Lane and Dingle Road. If you’re just outside Holy Land, we cover Granby Four Streets (1 mile north-east), St Michael's Hamlet (1 mile south-east), Sefton Park (1 mile east), Aigburth (2 miles south-east) and Wavertree (2 miles north-east). We also work in nearby towns such as Crosby (7 miles north), Orrell (6 miles north), Brighton-le-Sands (7 miles north-west), Grassendale (3 miles south-east), Seacombe (3 miles north-west) and Old Swan (3 miles north-east). Holy Land is one of the larger places we cover in Liverpool.
What’s near Holy Land
Typical jobs here are in homes near Otterspool Promenade, The Lyceum and The Belvedere Academy and the streets around them. Other local landmarks include St Cleopas' Church of England Junior Mixed and Infant School (within half a mile south-west), St Cleopas (within half a mile south-west) and The Anglesea pub (less than half a mile north-west). There’s a railway station in Holy Land itself: Brunswick station. A little further out are Liverpool Castle (1.7 miles north-west) and Royal Southern Hospital (0.8 miles north-west). Open spaces near Holy Land include Bidston Hill and Princes Park lake.
- Local facilities include South Toxteth (0.7 miles east)
Towns and villages near Holy Land
More services for Holy Land
How it works
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the work takes around two hours. At the end we talk you through how soon it can be used and how to care for it.
- We cut out all of the old sealant.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Preparing for the visit
- Tell us about parking, stairs or access
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
How to get a price
To get a price, send two or three photos through our quote form or call us. We will say immediately whether it can be repaired.
Related advice
Common questions in Holy Land
Do you cover the whole of Liverpool?
We work UK-wide, so Holy Land is covered. Prices don’t change with location.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you reseal over the old silicone?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
What information do you need?
Photos of the damage, a photo of the entire bath or shower and your postcode. After that, we just agree a date.
How long before I can shower?
Normally after around 24 hours. We’ll tell you the exact time.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
When to call us in Holy Land
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning only removes the surface.
It’s worth getting a quote if you see:
- Water getting behind the bath or tray
- Sealant that is split or lifting
- Silicone smeared on tiles
- Black spots in the silicone
Comparing quotes
- Whether the price is fixed and includes VAT
- What protection goes down before work starts
- What aftercare is recommended
- What preparation is included
Why it’s worth resealing in Holy Land
Resealing is a small job. Leaving split or mouldy sealant lets water get behind the bath or tray, which costs far more to put right. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Rooms protected and left tidy
- Typically one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
Take a look at our pricing.
Looking after it afterwards
How the surface is treated afterwards matters:
- Replace the seal when mould sets in
- Clean the sealant gently and regularly
- Do not stand toiletries on the seal
- Air the room after use
Use the extractor fan, dry the joints after bathing, and give them a regular clean with a mild cleaner to slow mould growth.
Damp below or loose tiles need checking quickly. There may be more going on, so we will tell you if it needs a builder or plumber.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Honest limits
A repair is not always the answer, and we will tell you before we start. Repairs won’t solve:
- Loose tiles, which need refixing first
- Hidden water damage
- Very wide gaps that need a trim
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Shower trays & enclosures
- Kitchen worktops & sinks
- Baths
- Wet rooms
- Basins & vanity units
Different materials, different repairs
Shower trays
We put weight on a tray before sealing it, for the same reason.
Baths
Baths are resealed with water in them, so the joint is at its widest.
About our accreditations · Every repair comes with a one-year guarantee.
