Isles of Scilly · England
Bath Resealing for Holy Vale homes
Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Holy Vale. Free, fixed quotes from your pictures.
- Silicone coming away from the tiles
- Mould you cannot clean out
- Old sealant that looks dirty
When we’d advise against a repair
We won’t take on work that will not last, so here’s what a repair cannot put right:
- Rotten walls or floors behind the bath
- Very wide gaps that need a trim
- Loose tiles, which need refixing first
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Kitchen worktops & sinks
- Wet rooms
- Baths
- Basins & vanity units
- Shower trays & enclosures
Bath resealing in Holy Vale, done in place
A good reseal is all about preparation: old silicone removed, mould treated, the joint cleaned and dried. Only then does the new sealant go on, in a neat, continuous bead. If you are dealing with leaks at the edges and an untidy old seal, we can usually put it right, on kitchen worktops & sinks, shower trays & enclosures and wet rooms alike.
All our work comes with a one-year guarantee, wherever you are in the Isles of Scilly.
- Where
- Holy Vale (TR21)
- Region
- Isles of Scilly
- Cover
- 12 months on all our work
- Quote
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What affects the price in Holy Vale
A fixed quote means you know the cost before booking. We take into account:
- The size and number of damaged areas
- The material and finish
- Doing more than one item at once
- How hard the colour is to match
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- Something in shot to show the size
- Natural light rather than flash
- One picture of the whole bath or shower
- Your postcode, so we can check dates
Most clients in Holy Vale get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Signs you need bath resealing in Holy Vale
Sealant does not last forever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint flexes each time the bath fills.
Signs it’s time to call us include:
- Sealant that’s split or lifting
- Missing sealant behind the taps
- Mould you cannot clean out
- A messy previous reseal
What to look for in a quote
- Whether a trained technician does the job
- What happens if they find more damage
- What preparation is included
- How the colour is matched
What happens on the day
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take around two hours, and you’re welcome to carry on with your day while we work.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- Any mould is treated and the joint dried.
- The bath is filled with water, or weight put on the tray.
- New mould-resistant silicone is applied and tooled neatly.
Before we arrive
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
- Move bottles, mats and clutter away from the area
Getting a price
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
FAQs for Holy Vale
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Can new silicone go over old?
No, we never seal over old silicone. It’s removed, cleaned off and the joint dried first.
Do you work in Holy Vale?
Yes. We cover the whole UK and come to Holy Vale and the rest of the Isles of Scilly. Send photos and we’ll quote, or call 0345 017 0787.
How long does resealing take?
Most reseals take about two hours. It then needs time to cure.
How long before I can shower?
You will get the curing time from us.
How do I book?
Photos of the damage, a photo of the whole bath or shower and your postcode. Then we will agree a date.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Is resealing worth it?
A reseal is one of the cheapest bathroom jobs there is. Leaving failed sealant can let water cause damage that costs far more to fix. We charge the same wherever you are, so there’s no premium for Holy Vale. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Technicians who travel to you, UK-wide
- Nothing taken out or refitted
- A year’s guarantee on all work
Read our prices page.
Other services in Holy Vale
Our work in Holy Vale
Holy Vale is about 36 miles west of Penzance, in the Isles of Scilly. Our technicians come to customers in Holy Vale and the surrounding area, so there’s no workshop to go to. Our repair technicians cover 13 places across the Isles of Scilly.
Our visits in TR21 are booked in the same way as anywhere else. That includes homes on High Lane, Green Lane and Pungies Lane and the roads around them. With the A3110 close by, Holy Vale is easy for our repair technicians to reach. Other places close to Holy Vale include Pelistry (1 mile north), Maypole (1 mile north-west), Trenoweth (1 mile north-west), Telegraph (1 mile north-west) and Old Town (1 mile south-west). For island and remote addresses, ring us first and we will plan the trip.
What’s near Holy Vale
Typical jobs here are in homes near Old Town Inn, among other places. Well-known places in the area include St Mary's Hospital (1.3 miles south-west) and Longstone Heritage Centre (0.6 miles west). Green spaces nearby include Mount Todden and Abbey Pool.
What your bath or shower is made of matters
Baths
We fill the bath before sealing, so the joint is at its widest.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Let steam out after showers
- Keep the joints dry
- Replace the seal when mould sets in
- Keep bottles off the joints
Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
About our accreditations · Every repair comes with a one-year guarantee.
