Wiltshire · England
Bath Resealing for Homington homes
Our repair technicians come to Homington for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.
- Silicone coming away from the tiles
- Damp near the bath
- Black mould in the sealant
What we are called out for in Homington
Most reseals are because of black mould. It grows into the sealant itself, so cleaning cannot get it all out.
People generally call us when they notice one of these:
- Silicone smeared on tiles
- Unsealed corners
- Stained silicone
- Gaps in the seal
Before booking anyone
- When it can be used again
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- Who will actually do the work
Bath resealing at your home in Homington
We reseal baths with them filled with water, so the joint opens fully, so the seal doesn’t tear when the bath is first used. We regularly repair basins & vanity units, shower trays & enclosures and kitchen worktops & sinks, and common reasons people get in touch are missing sealant behind the taps and sealant that’s split or lifting.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Area
- Homington (SP5)
- Area hub
- Wiltshire
- Cover
- 12 months on all our work
- Quote
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Replace the seal when mould sets in
- Clean the sealant gently and regularly
- Ventilate the bathroom well
- Dry the seal after bathing
Don’t scrape the sealant with anything sharp, and don’t stand bottles on the seal.
Reseal before water gets in. Split or lifting sealant is a sign it’s time.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- A bath or tray that moves, until its support is fixed
- Gaps too big for silicone alone
- Loose tiles, which need refixing first
If in doubt, send pictures and we will say what we think.
Materials we repair
- Baths
- Shower trays & enclosures
- Basins & vanity units
- Wet rooms
- Kitchen worktops & sinks
Repairs by material
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Baths
Baths are resealed with water in them, to open the joint fully.
Resealing in Homington: why it matters
Resealing is routine maintenance. Leaving split or mouldy sealant lets water get behind the bath or tray, and that damage costs much more to fix. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- We leave the room as we found it
- A year’s guarantee on all work
- Honest advice, even when it means no job
- Fixed prices from your pictures
Take a look at our pricing.
Common questions in Homington
How long will it take?
A bath or shower usually takes a couple of hours. Leave it to cure before use.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Will the price change on the day?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can I get a quote without a visit?
Typically, yes. Clear photos let us give you a fixed price without visiting.
Can you reseal over the old silicone?
All the old sealant comes out. New silicone won’t bond to old.
Is a repair better than a new one?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Our work in Homington
Homington is about 3 miles south-west of Salisbury, in Wiltshire. We visit homes and businesses in Homington, so there is no workshop to go to. Homington is one of 425 places in Wiltshire we cover.
All of SP5 is within our area. You’ll find streets such as Lower Road, Homington Road and Barber's Lane, all of which we cover. If you’re just outside Homington, we cover Coombe Bissett (1 mile west), Netherhampton (2 miles north), Bemerton (3 miles north), Bishopstone (3 miles west) and Quidhampton (3 miles north). Within a short drive, we also cover Salisbury (3 miles north-east), Amesbury (10 miles north), Bugmore (3 miles north-east), Milford (3 miles north-east), Old Sarum (5 miles north) and Bulford (12 miles north).
Local landmarks in Homington
Typical jobs here are in homes near Church of St Mary the Virgin, The Fox and Goose pub and Coombe Bissett Church of England Primary School and the streets around them. The nearest railway station is Salisbury station, roughly 2.7 miles north. Well-known places in the area include Old Sarum Castle (4.2 miles north) and Harvard Hospital (1.8 miles north-east). Green spaces nearby include Harnham Hill.
- Other local spots include Salisbury (2.6 miles north-east)
What affects the price in Homington
Each job gets its own fixed quote. This is what makes a difference:
- Access to the area
- How many items we do on one visit
- What kind of damage it is
- What the surface is made of
Our prices are the same across the UK, so there’s no premium for Homington. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
You can take the photos on your phone. Ensure they show:
- Any details about the material
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
To get a price, send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Towns and villages near Homington
Other services in Homington
What we do, step by step
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take about two hours for a bath, and we will keep you posted as we go.
- We cut out all of the old sealant.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- The bath is filled with water, or weight put on the tray.
- We apply fresh mould-resistant silicone and tool a neat bead.
Preparing for the visit
- Let us know if it has been repaired before
- Ensure the room can be ventilated
- Mention if the room is upstairs or in a flat
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
About our accreditations · Every repair comes with a one-year guarantee.
