Stockton-on-Tees · England
Bath & shower resealing (mastic) in Low Leven, Stockton-on-Tees
We travel to Low Leven for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, with a one-year guarantee.
- Leaks at the edges
- Black mould in the sealant
- Old sealant that looks dirty
What happens on the day
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the job itself takes a couple of hours. Before we leave, we explain how soon it can be used and how to look after it.
- We protect the area and mask the joint lines.
- Old sealant and residue are removed.
- We clean, treat and dry the joint.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
Getting a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.
Advice
Bath resealing in Low Leven without replacing anything
A good reseal is all about preparation: every bit of old silicone out, mould treated, the joint clean and dry. Then the fresh sealant goes on, in a neat, continuous bead. We work on wet rooms, shower trays & enclosures and baths, and people most frequently call us about gaps in the seal and old sealant that looks dirty.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Low Leven (TS17, TS15)
- Region
- Stockton-on-Tees
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Low Leven
Other services in Low Leven
Common problems we fix in Low Leven
No sealant lasts for ever. Each shower leaves moisture and soap behind, which mould feeds on, and the joint flexes each time the bath fills.
Most people get in touch after spotting one of these:
- Missing sealant behind the taps
- Silicone smeared on tiles
- Water getting behind the bath or tray
- Mould you can’t clean out
Before you book anyone
- How long the guarantee is and what it covers
- If travel is included in the price
- How to look after the finish
- Whether a trained technician does the job
Covering Low Leven
Low Leven is about 1 mile south of Ingleby Barwick, in Stockton-on-Tees. We visit homes and businesses in Low Leven and nearby villages, so there’s no workshop to go to. Low Leven is one of 31 towns and villages in Stockton-on-Tees where we work. You can also see our page for Newcastle upon Tyne, about 36 miles away.
Every address in TS17 and TS15 is covered. Whether you live on Bridgewater, Martinhoe Close and Watersmeet Close or anywhere nearby, we can come to you. Low Leven is on the A1044, so it’s easy for us to reach. Neighbouring places we cover include High Leven (1 mile north-east), Levendale (1 mile west), Ingleby Barwick (1 mile north), Eaglescliffe (2 miles north-west) and Egglescliffe (2 miles north-west). We also work in nearby towns such as Stockton-on-Tees (5 miles north), Billingham (8 miles north), Thornaby-on-Tees (3 miles north), Elm Tree Farm (5 miles north), Fairfield (5 miles north) and Wynyard (10 miles north).
Near you in Low Leven
Around Low Leven, we work in homes near Ingleby Mill Primary School, 1 Bridgewater pub and St. Francis of Assisi Church of England, among other places. The nearest railway station is Yarm station, roughly 1.6 miles south-west of the centre. A little further out are Carter Bequest Primary Care Hospital (4.4 miles north-east) and Yarm Castle (1.6 miles west).
Your questions about bath resealing in Low Leven
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before and we will plan for it.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
What does bath resealing cost?
We give a fixed quote from your photos. Send a close-up and a picture of the entire item with your TS17 postcode.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
How we price bath resealing
We give every job a fixed quote from photos. These are the things that affect it:
- Doing more than one item at once
- The material
- Whether old repairs or coatings need taking off
- How many areas need work
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
Most quotes are done from pictures alone. To make it quick:
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath or shower
- A clear, close picture of the problem area
- Where you are, by postcode
To get a price, send a couple of photos using our quote form or ring us. We’ll say straight away if a repair is the right fix.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Low Leven as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
How to care for the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Keep the joints dry
- Open a window after bathing
- Clean the joints with a mild cleaner
- Ventilate the bathroom well
Keep the room well ventilated, and wipe the joints after use to keep mould away.
Do not wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Gaps so wide they need filling or trims before sealing
- Movement in the bath or tray
- Loose tiles, which need refixing first
Send us pictures and we will tell you honestly.
Surfaces we repair
- Baths
- Kitchen worktops & sinks
- Basins & vanity units
- Shower trays & enclosures
- Wet rooms
Repairs by material
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Baths
Baths are resealed with water in them, so the joint is at its widest.
About our accreditations · Every repair comes with a one-year guarantee.
