Stockton-on-Tees · England
Bath & shower resealing (mastic) in High Leven, Stockton-on-Tees
Bath resealing in High Leven without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Mould you cannot clean out
- Gaps in the seal
- Unsealed corners
Do you need bath resealing in High Leven?
Black mould is the most common reason people reseal. It grows into the sealant itself, so cleaning cannot get it all out.
The most common problems we’re called about are:
- Black mould in the sealant
- Sealant that is split or lifting
- Water getting behind the bath or tray
- Discoloured, yellow sealant
Questions to ask before you book
- What the guarantee covers, and for how long
- What preparation is included
- How the colour is matched
- How your room will be protected
Bath resealing in High Leven without replacing anything
The key to a good reseal is getting all of the old silicone out. Fresh sealant does not stick to old, which is why many DIY jobs peel. Our technicians work on kitchen worktops & sinks, basins & vanity units and baths, and people most often call us about mould you can’t clean out and an untidy old seal.
All our work is covered by our one-year guarantee.
- Location
- High Leven (TS17, TS15)
- Area hub
- Stockton-on-Tees
- Guarantee
- One year on every repair
- Quote
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Places near High Leven
More services for High Leven
Resealing in High Leven: why it matters
Sealing over old silicone is a false economy. It peels within weeks, and mould stays trapped behind it. A proper reseal removes the old first. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why us?
- A fixed quote before you book
- A year’s guarantee on all work
- One price list for the entire UK
- CHAS and Constructionline accredited
Take a look at our pricing.
Questions from High Leven
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
My seal keeps tearing. Why?
The bath or tray is probably flexing. If it keeps happening, the support may need fixing.
Will there be a smell?
Expect a mild smell while we are working that clears as it cures.
What does bath resealing cost?
Because every job differs, we price from photos. You will get a fixed figure before you book.
What areas do you cover?
We work UK-wide, so High Leven is covered. Our prices are the same everywhere.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
How do I stop mould in sealant?
Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.
Landlords, agents and businesses in High Leven
For anyone letting property in or around High Leven, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What your bath or shower is made of matters
Shower trays
We put weight on a tray before sealing it, for the same reason.
Baths
Baths are resealed with water in them, so the joint is at its widest.
How we price bath resealing
You’ll know the full cost before you book. We take into account:
- Any earlier repairs that need removing first
- How many areas need work
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- A coin beside the damage so we can judge size
- A photo taken from further back
- Your postcode, so we can check dates
- Natural light rather than flash
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
What we do, step by step
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take about two hours for a bath. We tidy up before we leave and let you know when you can use it again.
- We protect the area and mask the joint lines.
- We remove the old sealant and every trace of residue.
- We clean, treat and dry the joint.
- Fresh silicone is applied in a continuous bead.
- We smooth the bead, remove the tape and leave it to cure.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Keeping it looking good
Once the work has cured, treat it gently:
- Give the seal a regular clean
- Air the room after use
- Keep the joints dry
- Store bottles on a shelf
Let it cure fully before using the bath or shower, normally about a day.
If you notice damp, stains on the ceiling below or loose tiles, act quickly. It may be more than a reseal, and we will say if you need a builder or plumber.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
High Leven and nearby
High Leven is about 1 mile south of Ingleby Barwick, in Stockton-on-Tees. Jobs in High Leven are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We cover all 31 towns and villages across Stockton-on-Tees, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 36 miles away.
Every address in TS17 and TS15 is within our area, from the main roads to the quietest streets. From Melandra Road, High Cross Road and Sober Hall Avenue or a nearby road, we can come to you. Main roads around High Leven include the A1044, which makes travel easy. If you are just outside High Leven, we cover Low Leven (1 mile south-west), Ingleby Barwick (1 mile north), Levendale (1 mile west), Eaglescliffe (2 miles north-west) and Egglescliffe (2 miles north-west). Larger places within reach include Stockton-on-Tees (5 miles north), Billingham (7 miles north), Thornaby-on-Tees (3 miles north), Elm Tree Farm (5 miles north), Fairfield (5 miles north-west) and Wynyard (9 miles north).
Local landmarks in High Leven
Locally, our jobs take us to homes close to Ingleby Mill Primary School, St. Francis of Assisi Church of England and Ingleby Manor Free School & Sixth Form. The closest station to High Leven is Yarm station, roughly 1.9 miles south-west. Further afield, we also cover the area around Newham Grange Farm Museum (3.9 miles north-east) and Carter Bequest Primary Care Hospital (4.1 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
