Telford and Wrekin · England

Bath Resealing in Ironbridge

Our repair technicians come to Ironbridge for bath, shower and sink resealing with new mould-resistant silicone. Everything is done in place, and the work is guaranteed.

  • Silicone smeared on tiles
  • Gaps in the seal
  • Black mould in the sealant
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath resealing in Ironbridge

Questions from Ironbridge

How do I stop mould in sealant?

Mould needs moisture. Run the fan, dry the joints and the new seal stays cleaner for longer.

Can tenants book a repair?

We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners across Telford and Wrekin.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Is there a call-out fee?

We do not add a call-out fee. The fixed quote covers the visit and the work.

Is the work guaranteed?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Do you hold any accreditations?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

How long does resealing take?

Most reseals take about two hours. Leave it to cure before use.

How we handle bath resealing in Ironbridge

We reseal baths, shower trays, basins and worktops using mould-resistant silicone. Most jobs take a couple of hours. We work on baths, kitchen worktops & sinks and wet rooms, and people most frequently call us about silicone coming away from the tiles and black mould in the sealant.

Every repair comes with our one-year guarantee.

Location
Ironbridge (TF8, TF12, TF7)
Region
Telford and Wrekin
Guarantee
One year on every repair
Price
Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

How we price bath resealing

We give every job a fixed price from photos. This is what makes a difference:

  • The type of damage
  • The colour and finish to match
  • Where the damage is and how we get to it
  • Whether we combine several jobs

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Quotes from your pictures

Before you send pictures, a few simple things make all the difference:

  • A coin or ruler next to the damage for scale
  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare
  • What it’s made of, if you know

The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say immediately whether it can be repaired.

How to care for the repair

Simple care helps the repair last. Our advice:

  • Give the seal a regular clean
  • Replace the seal when mould sets in
  • Open a window after bathing
  • Store bottles on a shelf

Use the extractor fan, dry the joints after bathing, and clean them regularly with a mild cleaner to slow mould growth.

Black mould in sealant is not just unsightly; it shows moisture is getting in. An early reseal keeps water where it belongs.

Work for landlords and builders

Landlords, letting agents and housing providers in Ironbridge use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Covering Ironbridge

Ironbridge is about 2 miles south-west of Madeley, in Telford and Wrekin. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. We work in 79 places across Telford and Wrekin, from the larger towns to small villages. We work right across the region, from Ironbridge to Birmingham (27 miles away).

Here we cover the TF8, TF12 and TF7 postcode area. Jobs here include addresses on New Road, Bath Road and Chapel Road. Neighbouring places we cover include Coalbrookdale (1 mile north), Jackfield (1 mile east), Benthall (1 mile south-west), Broseley (1 mile south) and Woodside (1 mile north-east). We also work in nearby towns such as Telford (4 miles north), Wellington (5 miles north), Dawley (3 miles north), Oakengates (5 miles north), Newport (11 miles north-east) and The Rock (4 miles north).

Landmarks near Ironbridge

Typical jobs here are in homes near Church of St Luke, Abraham Darby Academy and Crown Inn Including Outbuildings Adjoining South West, among other places. For rail, the closest station is Telford Central station, roughly 4.1 miles north-east. Nearby you will also find Telford Shopping Centre (3.8 miles north-east) and Princess Royal Hospital (5.9 miles north). Open spaces near Ironbridge include The Ercall.

Map of Ironbridge © OpenStreetMap contributors

Resealing in Ironbridge: why it matters

Resealing costs very little, and it protects everything around the bath. Failed sealant can lead to water damage that is much more expensive. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.

Why us?

  • One visit for most repairs
  • Free fixed quotes from pictures
  • Work done at your home or business
  • We leave the room as we found it

Take a look at our prices page.

Signs you need bath resealing in Ironbridge

In time, even good sealant discolours. Steam, soap and movement all wear it down.

Common reasons people in Ironbridge contact us include:

  • Unsealed corners
  • Gaps in the seal
  • A messy previous reseal
  • Water getting behind the bath or tray

Comparing quotes

  • What preparation is included
  • How your room will be protected
  • What aftercare is recommended
  • Whether a trained technician does the job

How to compare quotes

When we would advise against a repair

Not everything can be repaired, and we would rather say so up front. We cannot fix:

  • Water damage behind the bath that needs a builder
  • Gaps too big for silicone alone
  • A flexing bath

Not sure? Send pictures and we will give you a straight answer before booking.

Materials we work on in Ironbridge

  • Kitchen worktops & sinks
  • Baths
  • Wet rooms
  • Shower trays & enclosures
  • Basins & vanity units

How it works

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow around two hours. Before we go, we’ll explain how long to leave it and how to care for it.

  1. We cut out and remove all of the old sealant.
  2. Next we clean the joint and deal with mould.
  3. We ensure the joint is completely dry.
  4. Baths are filled with water first, so the joint is at its widest.
  5. We apply new mould-resistant silicone and tool it to a neat finish, taps included.

How to prepare

  • Let the surface dry out before the visit
  • Tell us if there are stairs or a lift
  • Move bottles, mats and clutter away from the area

Get a quote

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.

Get a free quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.