Argyll and Bute · Scotland
Bath Resealing in Kilmelford
Bath resealing for Kilmelford, without a refit. Get a fixed quote from your pictures, then we come to you.
- A messy previous reseal
- Gaps in the seal
- Gaps by the taps
Bath resealing in Kilmelford without replacing anything
We reseal baths, shower trays, basins and worktops, with mould-resistant sanitary silicone. A typical reseal takes a couple of hours, plus curing time. Typical jobs include missing sealant behind the taps and mould you can’t clean out, across basins & vanity units, kitchen worktops & sinks and shower trays & enclosures.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Kilmelford (PA34)
- County
- Argyll and Bute
- Guarantee
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
The process
Arrival times are agreed in advance, so you are not left guessing. Once we’re there, the work takes about two hours for a bath. The room is left tidy and ready to use once it has cured.
- We cut out and remove all of the old sealant.
- We clean the joint and treat any mould.
- We ensure the joint is completely dry.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, including around the taps.
Before we arrive
- Let us know if it has been repaired before
- Let us know about parking or access
- Keep children and pets away from the room on the day
How to get a price
For a price in Kilmelford, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
FAQs for Kilmelford
Why does the silicone keep cracking?
Something is moving. If it keeps happening, the support may need fixing.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Argyll and Bute.
How long will it take?
A bath or shower generally takes a couple of hours. Leave it to cure before use.
Can new silicone go over old?
No, we never seal over old silicone. The old sealant is cut out and the joint cleaned and dried.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Which areas do you work in?
Across the UK. Prices do not change with location.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Movement in the bath or tray
- Water damage behind the bath that needs a builder
- Tiles that move, until they’re refixed
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Baths
- Shower trays & enclosures
- Kitchen worktops & sinks
- Wet rooms
- Basins & vanity units
Places near Kilmelford
Other services in Kilmelford
Is resealing worth it?
Sealing over old silicone is a false economy. It peels within weeks, and mould stays trapped behind it. A proper reseal removes the old first. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
- Straight answers about what a repair can do
- Typically one visit, start to finish
Take a look at our prices page.
Prices and what affects them
There is no area surcharge for Kilmelford. What changes the price is:
- How much damage there is
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- The material and finish
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Getting a price from photos
You can take the photos on your phone, there is no need for anything special. Make sure they show:
- One picture of the entire bath or shower
- The material, if you know it
- Natural light rather than flash
- Details of any past repairs
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Kilmelford and the surrounding area
Kilmelford is about 34 miles north-west of Helensburgh, in Argyll and Bute. We visit customers in Kilmelford and the surrounding area, so you don’t need to take anything anywhere. Kilmelford is one of 118 places in Argyll and Bute we cover. We work right across the region, from Kilmelford to Glasgow (54 miles away).
Here we cover the PA34 postcode area. Neighbouring places we cover include Barravullin (4 miles south-west), Craobh Haven (4 miles south-west), Clachan Seil (6 miles north-west), Ardfern (6 miles south-west) and Ellenabeich (6 miles west). Larger places within reach include Oban (11 miles north), Ceann Loch Gilb (15 miles south), Lochgilphead (15 miles south), Dunollie (11 miles north), Dunbeg (13 miles north) and Inbhir Aora (15 miles east). If you are somewhere remote, call first so we can plan the visit.
Near you in Kilmelford
Our clients here include homes close to Kilmelford Parish Church, among other places. Other landmarks nearby include Caisteal na Nighinn Ruaidhe (4.3 miles east). For a walk, there is Loch a' Phearsain and Càrn Dearg.
What your bath or shower is made of matters
Baths
Baths are resealed with water in them, to open the joint fully.
Shower trays
Trays are sealed with weight on them, for the same reason.
Keeping it looking good
So the finish stays in good condition:
- Dry the seal after bathing
- Give the seal a regular clean
- Run the extractor fan during and after showers
- Reseal at the first sign of lifting
Avoid scraping the joints, and don’t stand bottles on the seal.
Black mould in sealant isn’t just unsightly. Resealing early keeps water out of the walls and floor.
Landlord and trade work in Kilmelford
Landlords, letting agents and housing providers in Kilmelford use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
