Surrey · England
Bath chip & crack repair in Kingswood, Surrey
We travel to Kingswood for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Holes from dropped items
- Chips caused by builders
When we’d advise against a repair
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we will say what we think.
What we work on
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Bath repair at your home in Kingswood
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for deep scratches in acrylic and a chip where the taps sit, on roll-top & freestanding, cast iron enamel and acrylic.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Location
- Kingswood (KT20)
- County
- Surrey
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why us?
- We come to you, anywhere in the UK
- We’ll tell you if it’s not worth repairing
- Every repair guaranteed for a year
- Rooms protected and left tidy
Read our full price list and resurfacing vs replacement cost guide.
About Kingswood
Kingswood is about 4 miles south-west of Coulsdon, in Surrey. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Kingswood is one of 395 places in Surrey where we work. Our nearest city page is London, about 15 miles away.
Our visits in KT20 are booked in the same way as anywhere else. We regularly work on streets such as Beech Drive, Bears Den and Hamilton Place and the roads around them. Being close to the B2032, Kingswood is easy for our technicians to reach. Nearby, we also work in Tadworth (1 mile north-west), Lower Kingswood (1 mile south), Walton on the Hill (2 miles south-west), Margery (2 miles south) and Mogador (2 miles south). Further out, we also cover Epsom (4 miles north-west), Horley (8 miles south), Redhill (4 miles south-east), Ewell (5 miles north-west), Reigate (4 miles south) and Walton-on-Thames (11 miles north-west).
Around Kingswood
In Kingswood, that means homes near Eyhurst Park, Tadworth Primary School and Kingswood Arms. Nearby too are Chinthurst School (1.1 miles west), Church of St Andrew (0.5 miles south-west) and The Beacon School (1.7 miles north). Kingswood has its own railway station: Kingswood station. Other landmarks nearby include The Ashley Centre (3.8 miles north-west) and Walton on the Hill (1.7 miles west). For a walk, there’s Colley Hill and Cuddington Meadows.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to two to three hours for most chips, tidy-up included.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the day after, the bath is ready to use.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
Read more
Questions from Kingswood
When can I have a bath again?
Typically the following day. We will tell you the exact curing time when we finish.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Which areas do you work in?
The entire UK, including all of Surrey. Send your postcode with your pictures and we will confirm dates.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
How we price bath repair
Repairs from £95. You won’t pay by the hour. The price depends on:
- The type of damage
- Whether we combine several jobs
- Unusual colours or finishes
- How much damage there is
Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- A clear, close picture of the problem area
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- Details of any past repairs
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Do not scrub with anything abrasive
- Fix dripping taps early to stop staining and limescale
- Have new chips seen to early
- Make sure an acrylic bath is firm underfoot
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Also near Kingswood
More services for Kingswood
Landlord and trade work in Kingswood
Landlords, letting agents and housing providers in Kingswood use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
We are used to working with agents and managing companies. Send the address, pictures and access details.
About our accreditations · Every repair comes with a one-year guarantee.
