Perth and Kinross · Scotland
Bath & shower resealing (mastic) in Kinnesswood, Perth and Kinross
Bath, shower and sink resealing with new mould-resistant silicone for homeowners, landlords and businesses in Kinnesswood. Send pictures for a free, fixed quote.
- Silicone coming away from the tiles
- Black mould in the sealant
- Old sealant that looks dirty
Prices and what affects them
We charge the same across the UK, including Kinnesswood. The price reflects:
- The colour and finish to match
- Access to the area
- The material and finish
- Doing more than one item at once
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Getting a price from pictures
Most quotes are done from photos alone. To make it quick:
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- The material, if you know it
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower, we can price the job the same day in most cases.
Bath resealing in Kinnesswood, done in place
Preparation is everything in a reseal: old silicone removed, mould treated, the joint cleaned and dried. Then the fresh sealant goes on, in a neat, continuous bead. We work on basins & vanity units, shower trays & enclosures and kitchen worktops & sinks, and the jobs we see most are gaps in the seal and black spots in the silicone.
Every job is backed for twelve months in Kinnesswood and everywhere else. We return to put right any problem with the work.
- Location
- Kinnesswood (KY13)
- County
- Perth and Kinross
- Cover
- A year, on every repair
- Price
- Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath resealing in Kinnesswood
Joints split if the bath or tray moves, frequently because it was sealed with the bath empty.
Common reasons people in Kinnesswood contact us are:
- An untidy old seal
- Stained silicone
- Black spots in the silicone
- Damp near the bath
What to look for in a quote
- What happens if the damage is worse than the pictures show
- The length of the guarantee and what it covers
- Who turns up on the day
- What preparation is included
Resealing in Kinnesswood: why it matters
Resealing costs very little. Leaving failed sealant can let water cause damage that costs far more to fix. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
What you get with us
- No need to remove anything
- Fixed prices from your pictures
- CHAS and Constructionline accredited
- We will tell you if it’s not worth repairing
See our pricing.
Kinnesswood questions
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Do you cover Kinnesswood?
We do. Repair technicians travel to Kinnesswood from across the region, with no extra charge for travel.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Why does my sealant keep going mouldy?
Normally poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
Will the price change on the day?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
What happens after I send pictures?
You will get a fixed quote back. There is no obligation to book.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes around two hours. We tidy up before we leave and tell you when it’s ready to use.
- The surrounding area is protected and the joints masked.
- Old sealant and residue are removed.
- The joint is cleaned, treated and dried.
- We run a continuous bead of new silicone.
- The bead is smoothed, the tape removed and the seal left to cure.
How to prepare
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
How to get a price
Most customers in Kinnesswood get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Landlord and trade work in Kinnesswood
We are used to working with agents and managing companies. Send the address, pictures and access details.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How to care for the repair
Simple care helps the repair last. Our advice:
- Store bottles on a shelf
- Wipe the joints dry after use
- Let steam out after showers
- Ventilate the bathroom well
Use the extractor fan, wipe the joints dry after use, and give them a regular clean with a mild cleaner to slow mould growth.
Do not wait until water gets behind the bath. Split or lifting sealant is a sign it’s time.
Also near Kinnesswood
What else we do in Kinnesswood
What your bath or shower is made of matters
Baths
We fill the bath before sealing, so the joint is at its widest.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Kinnesswood and the surrounding area
Kinnesswood is about 6 miles west of Glenrothes, in Perth and Kinross. Jobs in Kinnesswood are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Kinnesswood is one of 107 places in Perth and Kinross where we work. Our jobs stretch from Kinnesswood to Edinburgh (about 19 miles away).
Here we cover the KY13 postcode area. Streets in the area include Main Street, The Cobbles and Back Dykes Road, and we cover them all. Neighbouring places we cover include Scotlandwell (1 mile south-east), Wester Balgedie (1 mile north-west), Glenlomond (1 mile north-west), Ballingry (3 miles south) and Milnathort (4 miles west). Within a short drive, we also cover Perth (14 miles north), Kinross (4 miles west), Letham (14 miles north-west), Scone (15 miles north), Tulloch (15 miles north) and Oakbank (13 miles north-west).
Around Kinnesswood
Our clients here include homes close to Easter Balgedie church and the streets around them. A little further out are Loch Leven Castle (2.5 miles west) and Glenrothes Hospital (5.7 miles east). For a walk, there’s Loch Leven National Nature Reserve and West Lomond.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
