Cumbria · England
Bath & shower resealing (mastic) in Low Nibthwaite, Cumbria
Bath resealing in and around Low Nibthwaite: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Discoloured, yellow sealant
- Silicone smeared on tiles
- Gaps in the seal
How we handle bath resealing in Low Nibthwaite
The key to a good reseal is getting all of the old silicone out. Fresh sealant doesn’t stick to old, which is why so many DIY reseals peel. We work on kitchen worktops & sinks, baths and shower trays & enclosures, and the jobs we see most are black spots in the silicone and water getting behind the bath or tray.
You get a one-year guarantee, the same in Low Nibthwaite as everywhere else we work.
- Location
- Low Nibthwaite (LA12)
- Region
- Cumbria
- Warranty
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Why reseal now?
Sealing over old silicone is a false economy. It peels within weeks, and traps mould underneath. A proper reseal removes the old first. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- Work done at your home or business
- No extra charge for your area
- Fixed prices from your pictures
- Straight answers about what a repair can do
Take a look at our full price list.
What happens on the day
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for around two hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First we strip out every bit of the old mastic.
- The joint is cleaned and any mould treated.
- The joint is dried thoroughly.
- For a bath, we fill it with water first so the joint is at its widest.
- We run a new bead of mould-resistant silicone and smooth it neatly, including around the taps.
Before we arrive
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
Materials and what they mean for the repair
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, with the joint fully dried first.
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Signs you need bath resealing in Low Nibthwaite
Sealant splits when the bath or tray moves, frequently because it was sealed with the bath empty.
Keep an eye out for these signs:
- Water getting behind the bath or tray
- Gaps in the seal
- Old sealant that looks dirty
- Black spots in the silicone
Questions to ask before you book
- What preparation is included
- A fixed quote, and whether VAT is included
- What happens if the damage is worse than the photos show
- What protection goes down before work starts
Questions from Low Nibthwaite
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you work in Low Nibthwaite?
Yes, we do. Repair technicians travel to Low Nibthwaite from across the region, and the price is the same as everywhere else.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Why does my sealant keep going mouldy?
Usually poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Towns and villages near Low Nibthwaite
What else we do in Low Nibthwaite
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Keeping it looking good
So the finish stays in good condition for years:
- Air the room after use
- Ventilate the bathroom well
- Keep bottles off the joints
- Keep the joints dry
Let it cure fully before using the bath or shower, normally about a day.
Mouldy sealant is more than a cosmetic problem. An early reseal keeps water where it belongs.
What bath resealing costs
You will not pay by the hour. The price is based on:
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- The size and number of damaged areas
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Natural light rather than flash
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
About Low Nibthwaite
Low Nibthwaite is about 6 miles north of Ulverston, in Cumbria. Our technicians come to clients in Low Nibthwaite and the surrounding area, so there’s no workshop to go to. We work in 438 places across Cumbria, from the larger towns to small villages. Our jobs stretch from Low Nibthwaite to Liverpool (61 miles away).
Here we cover the LA12 postcode area. Neighbouring places we cover include Lowick Green (2 miles south), Gawthwaite (3 miles south-west), Penny Bridge (3 miles south), Grizebeck (4 miles south-west) and Torver (4 miles north). We also work in nearby towns such as Barrow-in-Furness (13 miles south-west), Kendal (14 miles east), Ulverston (6 miles south), Hindpool (13 miles south-west), Salthouse (13 miles south-west) and Dalton-in-Furness (10 miles south-west).
Landmarks near Low Nibthwaite
We visit homes around St John the Baptist's Church and the streets around them. Open spaces near Low Nibthwaite include Burney and Allan Tarn.
About our accreditations · Every repair comes with a one-year guarantee.
