Cornwall · England
Bath Resealing for Lower Bodinnar homes
Bath resealing across Lower Bodinnar and nearby, done in a single visit in most cases.
- A messy previous reseal
- Black mould in the sealant
- Damp near the bath
Why reseal now?
Compared with repairing water damage, resealing is cheap. It’s a quick job that protects your walls and floors. We charge the same wherever you are, with no extra for Lower Bodinnar. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Lower Bodinnar clients choose us
- No extra charge for your area
- Rooms protected and left tidy
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page.
Bath resealing in Lower Bodinnar, done in place
We cut out all of the old sealant, treat any mould, and apply fresh mould-resistant silicone. We do this for baths, showers, sinks and worktops, including the awkward bits behind the taps. We regularly repair wet rooms, shower trays & enclosures and kitchen worktops & sinks, and people most frequently call us about old sealant that looks dirty and gaps in the seal.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Lower Bodinnar (TR20)
- County
- Cornwall
- Cover
- 12 months on all our work
- Quotes
- Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Shower trays
We put weight on a tray before sealing it, so the joint is at its widest.
Baths
Baths are resealed with water in them, to open the joint fully.
Where we work around Lower Bodinnar
Lower Bodinnar is about 3 miles west of Penzance, in Cornwall. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 644 towns and villages in Cornwall.
Our visits in TR20 work the same way as everywhere else we cover. Other places close to Lower Bodinnar include Newbridge (1 mile south), Little Bosullow (1 mile north), Bojewyan (2 miles north-west), Pendeen (3 miles north-west) and Tregeseal (3 miles west). Larger places within reach include Camborne (15 miles east), Penzance (3 miles east), Helston (15 miles east), Hayle (10 miles north-east), St Ives (8 miles north-east) and Rosewarne (15 miles north-east).
Near you in Lower Bodinnar
Locally, our jobs take us to homes close to Mounts Bay Academy, among other places. The closest station to Lower Bodinnar is Penzance station, about 3.4 miles east of the centre. A little further out are West Cornwall Hospital (3.1 miles east) and National Gypsy Museum (2.3 miles south-east). For a walk, there is Carn Kenidjack and Baker's Pit Nature Reserve.
What else we do in Lower Bodinnar
What we are called out for in Lower Bodinnar
Black mould is the most common reason people reseal. It grows into the silicone, so cleaning only removes the surface.
Keep an eye out for any of the following:
- Sealant that’s split or lifting
- Gaps by the taps
- Leaks at the edges
- Mould you can’t clean out
Questions to ask before you book
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
- Whether cleaning and preparation are in the price
- How to look after the finish
FAQs for Lower Bodinnar
Can you repair something that’s been repaired before?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Are there extra charges for Lower Bodinnar?
Travel is included in the price, and we charge the same wherever you are.
Why does the silicone keep cracking?
Movement is the usual cause, or it was sealed with the bath empty. We fill the bath before sealing it.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Why does my sealant keep going mouldy?
Usually poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
What a repair can’t fix
We won’t take on work that will not last, so these are the limits:
- Very wide gaps that need a trim
- Hollow or loose tiles
- A bath or tray that moves, until its support is fixed
Send us photos and we’ll tell you honestly.
Materials we work on in Lower Bodinnar
- Kitchen worktops & sinks
- Basins & vanity units
- Baths
- Wet rooms
- Shower trays & enclosures
Prices and what affects them
We price every job individually. What matters most is:
- The material and finish
- The type of damage
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- Your postcode, so we can check dates
If you’re in Lower Bodinnar and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a couple of hours. If we find something your pictures didn’t show, we will explain it before carrying on.
- The old silicone is cut out completely.
- Residue is removed and the joint cleaned.
- Any mould is treated and the joint dried.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
How to prepare
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
- Clear the area around the damage
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
